PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
/* Low-level file-handling.
|
|
|
|
|
Copyright (C) 2012, 2013 Free Software Foundation, Inc.
|
|
|
|
|
|
|
|
|
|
This file is part of GDB.
|
|
|
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
|
|
|
|
|
|
#ifdef GDBSERVER
|
|
|
|
|
#include "server.h"
|
|
|
|
|
#else
|
|
|
|
|
#include "defs.h"
|
remove gdb_string.h
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
2013-11-06 14:14:23 +00:00
|
|
|
|
#include <string.h>
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
#endif
|
|
|
|
|
#include "filestuff.h"
|
|
|
|
|
#include "gdb_vecs.h"
|
|
|
|
|
|
|
|
|
|
#include <string.h>
|
|
|
|
|
#include <fcntl.h>
|
|
|
|
|
#include <unistd.h>
|
|
|
|
|
#include <sys/types.h>
|
remove gdb_stat.h
This patch is purely mechanical. It removes gdb_stat.h and changes
the code to use sys/stat.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_stat.h: Remove.
* ada-lang.c: Use sys/stat.h, not gdb_stat.h.
* common/filestuff.c: Use sys/stat.h, not gdb_stat.h.
* common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h.
* corefile.c: Use sys/stat.h, not gdb_stat.h.
* ctf.c: Use sys/stat.h, not gdb_stat.h.
* darwin-nat.c: Use sys/stat.h, not gdb_stat.h.
* dbxread.c: Use sys/stat.h, not gdb_stat.h.
* dwarf2read.c: Use sys/stat.h, not gdb_stat.h.
* exec.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h.
* inf-child.c: Use sys/stat.h, not gdb_stat.h.
* jit.c: Use sys/stat.h, not gdb_stat.h.
* linux-nat.c: Use sys/stat.h, not gdb_stat.h.
* m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h.
* main.c: Use sys/stat.h, not gdb_stat.h.
* mdebugread.c: Use sys/stat.h, not gdb_stat.h.
* mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h.
* nto-tdep.c: Use sys/stat.h, not gdb_stat.h.
* objfiles.c: Use sys/stat.h, not gdb_stat.h.
* procfs.c: Use sys/stat.h, not gdb_stat.h.
* remote-fileio.c: Use sys/stat.h, not gdb_stat.h.
* remote-mips.c: Use sys/stat.h, not gdb_stat.h.
* remote.c: Use sys/stat.h, not gdb_stat.h.
* rs6000-nat.c: Use sys/stat.h, not gdb_stat.h.
* sol-thread.c: Use sys/stat.h, not gdb_stat.h.
* solib-spu.c: Use sys/stat.h, not gdb_stat.h.
* source.c: Use sys/stat.h, not gdb_stat.h.
* symfile.c: Use sys/stat.h, not gdb_stat.h.
* symmisc.c: Use sys/stat.h, not gdb_stat.h.
* symtab.c: Use sys/stat.h, not gdb_stat.h.
* top.c: Use sys/stat.h, not gdb_stat.h.
* xcoffread.c: Use sys/stat.h, not gdb_stat.h.
2013-11-06 14:55:51 +00:00
|
|
|
|
#include <sys/stat.h>
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
|
2013-04-23 15:49:25 +00:00
|
|
|
|
#ifdef USE_WIN32API
|
|
|
|
|
#include <winsock2.h>
|
|
|
|
|
#include <windows.h>
|
common/filestuff.c: No sockets on DJGPP.
Building gdb with --host=i586-pc-msdosdjgpp ends up with:
i586-pc-msdosdjgpp-gcc -g -O2 -I../../src/gdb/config/djgpp -I. -I../../src/gdb -I../../src/gdb/common -I../../src/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../src/gdb/../include/opcode -I../../src/gdb/../opcodes/.. -I../../src/gdb/../readline/.. -I../bfd -I../../src/gdb/../bfd -I../../src/gdb/../include -I../libdecnumber -I../../src/gdb/../libdecnumber -I./../intl -I../../src/gdb/gnulib/import -Ibuild-gnulib/import -Wall -Wdeclaration-after-statement -Wpointer-arith -Wformat-nonliteral -Wpointer-sign -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wmissing-prototypes -Wdeclaration-after-statement -Wempty-body -Werror -c -o filestuff.o -MT filestuff.o -MMD -MP -MF .deps/filestuff.Tpo ../../src/gdb/common/filestuff.c
../../src/gdb/common/filestuff.c:38:24: fatal error: sys/socket.h: No such file or directory
There are no sockets on djgpp. This #ifdef's out the bits in the file
that use sockets, depending on whether winsock or sys/socket.h is
available.
As alternative approach, given ser-tcp.c, ser-pipe.c, etc. are split
into separate files, and which to use is selected by configure.ac:
dnl Figure out which of the many generic ser-*.c files the _host_ supports.
SER_HARDWIRE="ser-base.o ser-unix.o ser-pipe.o ser-tcp.o"
case ${host} in
*go32* ) SER_HARDWIRE=ser-go32.o ;;
*djgpp* ) SER_HARDWIRE=ser-go32.o ;;
*mingw32*) SER_HARDWIRE="ser-base.o ser-tcp.o ser-mingw.o" ;;
esac
AC_SUBST(SER_HARDWIRE)
... I considered splitting filestuff.c similarly. But I quickly gave
up on the idea, as it looked like a lot more complication over this
approach, for no real gain. Plus, there are uses of these functions
outside the ser*.c framework.
gdbserver's configure.ac is already checking for sys/socket.h.
gdb/
2013-05-23 Pedro Alves <palves@redhat.com>
* common/filestuff.c [USE_WIN32API]: Define HAVE_SOCKETS.
[HAVE_SYS_SOCKET_H]: Define HAVE_SOCKETS.
(socket_mark_cloexec, gdb_socketpair_cloexec, gdb_socket_cloexec):
Only define if HAVE_SOCKETS is defined.
* configure.ac: Check for sys/socket.h.
* config.in, configure: Regenerate.
2013-05-23 18:37:00 +00:00
|
|
|
|
#define HAVE_SOCKETS 1
|
|
|
|
|
#elif defined HAVE_SYS_SOCKET_H
|
2013-04-23 15:49:25 +00:00
|
|
|
|
#include <sys/socket.h>
|
|
|
|
|
/* Define HAVE_F_GETFD if we plan to use F_GETFD. */
|
|
|
|
|
#define HAVE_F_GETFD F_GETFD
|
common/filestuff.c: No sockets on DJGPP.
Building gdb with --host=i586-pc-msdosdjgpp ends up with:
i586-pc-msdosdjgpp-gcc -g -O2 -I../../src/gdb/config/djgpp -I. -I../../src/gdb -I../../src/gdb/common -I../../src/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../src/gdb/../include/opcode -I../../src/gdb/../opcodes/.. -I../../src/gdb/../readline/.. -I../bfd -I../../src/gdb/../bfd -I../../src/gdb/../include -I../libdecnumber -I../../src/gdb/../libdecnumber -I./../intl -I../../src/gdb/gnulib/import -Ibuild-gnulib/import -Wall -Wdeclaration-after-statement -Wpointer-arith -Wformat-nonliteral -Wpointer-sign -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wmissing-prototypes -Wdeclaration-after-statement -Wempty-body -Werror -c -o filestuff.o -MT filestuff.o -MMD -MP -MF .deps/filestuff.Tpo ../../src/gdb/common/filestuff.c
../../src/gdb/common/filestuff.c:38:24: fatal error: sys/socket.h: No such file or directory
There are no sockets on djgpp. This #ifdef's out the bits in the file
that use sockets, depending on whether winsock or sys/socket.h is
available.
As alternative approach, given ser-tcp.c, ser-pipe.c, etc. are split
into separate files, and which to use is selected by configure.ac:
dnl Figure out which of the many generic ser-*.c files the _host_ supports.
SER_HARDWIRE="ser-base.o ser-unix.o ser-pipe.o ser-tcp.o"
case ${host} in
*go32* ) SER_HARDWIRE=ser-go32.o ;;
*djgpp* ) SER_HARDWIRE=ser-go32.o ;;
*mingw32*) SER_HARDWIRE="ser-base.o ser-tcp.o ser-mingw.o" ;;
esac
AC_SUBST(SER_HARDWIRE)
... I considered splitting filestuff.c similarly. But I quickly gave
up on the idea, as it looked like a lot more complication over this
approach, for no real gain. Plus, there are uses of these functions
outside the ser*.c framework.
gdbserver's configure.ac is already checking for sys/socket.h.
gdb/
2013-05-23 Pedro Alves <palves@redhat.com>
* common/filestuff.c [USE_WIN32API]: Define HAVE_SOCKETS.
[HAVE_SYS_SOCKET_H]: Define HAVE_SOCKETS.
(socket_mark_cloexec, gdb_socketpair_cloexec, gdb_socket_cloexec):
Only define if HAVE_SOCKETS is defined.
* configure.ac: Check for sys/socket.h.
* config.in, configure: Regenerate.
2013-05-23 18:37:00 +00:00
|
|
|
|
#define HAVE_SOCKETS 1
|
2013-04-23 15:49:25 +00:00
|
|
|
|
#endif
|
|
|
|
|
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
#ifdef HAVE_SYS_RESOURCE_H
|
|
|
|
|
#include <sys/resource.h>
|
|
|
|
|
#endif /* HAVE_SYS_RESOURCE_H */
|
|
|
|
|
|
|
|
|
|
#ifndef O_CLOEXEC
|
|
|
|
|
#define O_CLOEXEC 0
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifndef SOCK_CLOEXEC
|
|
|
|
|
#define SOCK_CLOEXEC 0
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#ifndef HAVE_FDWALK
|
|
|
|
|
|
2013-11-06 14:28:57 +00:00
|
|
|
|
#include <dirent.h>
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
|
|
|
|
|
/* Replacement for fdwalk, if the system doesn't define it. Walks all
|
|
|
|
|
open file descriptors (though this implementation may walk closed
|
|
|
|
|
ones as well, depending on the host platform's capabilities) and
|
|
|
|
|
call FUNC with ARG. If FUNC returns non-zero, stops immediately
|
|
|
|
|
and returns the same value. Otherwise, returns zero when
|
|
|
|
|
finished. */
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
fdwalk (int (*func) (void *, int), void *arg)
|
|
|
|
|
{
|
|
|
|
|
/* Checking __linux__ isn't great but it isn't clear what would be
|
|
|
|
|
better. There doesn't seem to be a good way to check for this in
|
|
|
|
|
configure. */
|
|
|
|
|
#ifdef __linux__
|
|
|
|
|
DIR *dir;
|
|
|
|
|
|
|
|
|
|
dir = opendir ("/proc/self/fd");
|
|
|
|
|
if (dir != NULL)
|
|
|
|
|
{
|
|
|
|
|
struct dirent *entry;
|
|
|
|
|
int result = 0;
|
|
|
|
|
|
|
|
|
|
for (entry = readdir (dir); entry != NULL; entry = readdir (dir))
|
|
|
|
|
{
|
|
|
|
|
long fd;
|
|
|
|
|
char *tail;
|
|
|
|
|
int result;
|
|
|
|
|
|
|
|
|
|
errno = 0;
|
|
|
|
|
fd = strtol (entry->d_name, &tail, 10);
|
|
|
|
|
if (*tail != '\0' || errno != 0)
|
|
|
|
|
continue;
|
|
|
|
|
if ((int) fd != fd)
|
|
|
|
|
{
|
|
|
|
|
/* What can we do here really? */
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (fd == dirfd (dir))
|
|
|
|
|
continue;
|
|
|
|
|
|
|
|
|
|
result = func (arg, fd);
|
|
|
|
|
if (result != 0)
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
closedir (dir);
|
|
|
|
|
return result;
|
|
|
|
|
}
|
|
|
|
|
/* We may fall through to the next case. */
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
{
|
|
|
|
|
int max, fd;
|
|
|
|
|
|
|
|
|
|
#ifdef HAVE_GETRLIMIT
|
|
|
|
|
struct rlimit rlim;
|
|
|
|
|
|
|
|
|
|
if (getrlimit (RLIMIT_NOFILE, &rlim) == 0 && rlim.rlim_max != RLIM_INFINITY)
|
|
|
|
|
max = rlim.rlim_max;
|
|
|
|
|
else
|
|
|
|
|
#endif
|
|
|
|
|
{
|
|
|
|
|
#ifdef _SC_OPEN_MAX
|
|
|
|
|
max = sysconf (_SC_OPEN_MAX);
|
|
|
|
|
#else
|
|
|
|
|
/* Whoops. */
|
|
|
|
|
return 0;
|
|
|
|
|
#endif /* _SC_OPEN_MAX */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
for (fd = 0; fd < max; ++fd)
|
|
|
|
|
{
|
|
|
|
|
struct stat sb;
|
|
|
|
|
int result;
|
|
|
|
|
|
|
|
|
|
/* Only call FUNC for open fds. */
|
|
|
|
|
if (fstat (fd, &sb) == -1)
|
|
|
|
|
continue;
|
|
|
|
|
|
|
|
|
|
result = func (arg, fd);
|
|
|
|
|
if (result != 0)
|
|
|
|
|
return result;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#endif /* HAVE_FDWALK */
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* A VEC holding all the fds open when notice_open_fds was called. We
|
|
|
|
|
don't use a hashtab because libiberty isn't linked into gdbserver;
|
|
|
|
|
and anyway we don't expect there to be many open fds. */
|
|
|
|
|
|
|
|
|
|
static VEC (int) *open_fds;
|
|
|
|
|
|
|
|
|
|
/* An fdwalk callback function used by notice_open_fds. It puts the
|
|
|
|
|
given file descriptor into the vec. */
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
do_mark_open_fd (void *ignore, int fd)
|
|
|
|
|
{
|
|
|
|
|
VEC_safe_push (int, open_fds, fd);
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* See filestuff.h. */
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
|
notice_open_fds (void)
|
|
|
|
|
{
|
|
|
|
|
fdwalk (do_mark_open_fd, NULL);
|
|
|
|
|
}
|
|
|
|
|
|
2013-05-10 17:01:00 +00:00
|
|
|
|
/* See filestuff.h. */
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
|
mark_fd_no_cloexec (int fd)
|
|
|
|
|
{
|
|
|
|
|
do_mark_open_fd (NULL, fd);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* See filestuff.h. */
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
|
unmark_fd_no_cloexec (int fd)
|
|
|
|
|
{
|
|
|
|
|
int i, val;
|
|
|
|
|
|
|
|
|
|
for (i = 0; VEC_iterate (int, open_fds, i, val); ++i)
|
|
|
|
|
{
|
|
|
|
|
if (fd == val)
|
|
|
|
|
{
|
|
|
|
|
VEC_unordered_remove (int, open_fds, i);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
gdb_assert_not_reached (_("fd not found in open_fds"));
|
|
|
|
|
}
|
|
|
|
|
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
/* Helper function for close_most_fds that closes the file descriptor
|
|
|
|
|
if appropriate. */
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
do_close (void *ignore, int fd)
|
|
|
|
|
{
|
|
|
|
|
int i, val;
|
|
|
|
|
|
|
|
|
|
for (i = 0; VEC_iterate (int, open_fds, i, val); ++i)
|
|
|
|
|
{
|
|
|
|
|
if (fd == val)
|
|
|
|
|
{
|
|
|
|
|
/* Keep this one open. */
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
close (fd);
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* See filestuff.h. */
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
|
close_most_fds (void)
|
|
|
|
|
{
|
|
|
|
|
fdwalk (do_close, NULL);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* This is a tri-state flag. When zero it means we haven't yet tried
|
|
|
|
|
O_CLOEXEC. When positive it means that O_CLOEXEC works on this
|
|
|
|
|
host. When negative, it means that O_CLOEXEC doesn't work. We
|
|
|
|
|
track this state because, while gdb might have been compiled
|
|
|
|
|
against a libc that supplies O_CLOEXEC, there is no guarantee that
|
|
|
|
|
the kernel supports it. */
|
|
|
|
|
|
|
|
|
|
static int trust_o_cloexec;
|
|
|
|
|
|
|
|
|
|
/* Mark FD as close-on-exec, ignoring errors. Update
|
|
|
|
|
TRUST_O_CLOEXEC. */
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
mark_cloexec (int fd)
|
|
|
|
|
{
|
2013-04-23 15:49:25 +00:00
|
|
|
|
#ifdef HAVE_F_GETFD
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
int old = fcntl (fd, F_GETFD, 0);
|
|
|
|
|
|
|
|
|
|
if (old != -1)
|
|
|
|
|
{
|
|
|
|
|
fcntl (fd, F_SETFD, old | FD_CLOEXEC);
|
|
|
|
|
|
|
|
|
|
if (trust_o_cloexec == 0)
|
|
|
|
|
{
|
|
|
|
|
if ((old & FD_CLOEXEC) != 0)
|
|
|
|
|
trust_o_cloexec = 1;
|
|
|
|
|
else
|
|
|
|
|
trust_o_cloexec = -1;
|
|
|
|
|
}
|
|
|
|
|
}
|
2013-04-23 15:49:25 +00:00
|
|
|
|
#endif /* HAVE_F_GETFD */
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Depending on TRUST_O_CLOEXEC, mark FD as close-on-exec. */
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
maybe_mark_cloexec (int fd)
|
|
|
|
|
{
|
|
|
|
|
if (trust_o_cloexec <= 0)
|
|
|
|
|
mark_cloexec (fd);
|
|
|
|
|
}
|
|
|
|
|
|
common/filestuff.c: No sockets on DJGPP.
Building gdb with --host=i586-pc-msdosdjgpp ends up with:
i586-pc-msdosdjgpp-gcc -g -O2 -I../../src/gdb/config/djgpp -I. -I../../src/gdb -I../../src/gdb/common -I../../src/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../src/gdb/../include/opcode -I../../src/gdb/../opcodes/.. -I../../src/gdb/../readline/.. -I../bfd -I../../src/gdb/../bfd -I../../src/gdb/../include -I../libdecnumber -I../../src/gdb/../libdecnumber -I./../intl -I../../src/gdb/gnulib/import -Ibuild-gnulib/import -Wall -Wdeclaration-after-statement -Wpointer-arith -Wformat-nonliteral -Wpointer-sign -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wmissing-prototypes -Wdeclaration-after-statement -Wempty-body -Werror -c -o filestuff.o -MT filestuff.o -MMD -MP -MF .deps/filestuff.Tpo ../../src/gdb/common/filestuff.c
../../src/gdb/common/filestuff.c:38:24: fatal error: sys/socket.h: No such file or directory
There are no sockets on djgpp. This #ifdef's out the bits in the file
that use sockets, depending on whether winsock or sys/socket.h is
available.
As alternative approach, given ser-tcp.c, ser-pipe.c, etc. are split
into separate files, and which to use is selected by configure.ac:
dnl Figure out which of the many generic ser-*.c files the _host_ supports.
SER_HARDWIRE="ser-base.o ser-unix.o ser-pipe.o ser-tcp.o"
case ${host} in
*go32* ) SER_HARDWIRE=ser-go32.o ;;
*djgpp* ) SER_HARDWIRE=ser-go32.o ;;
*mingw32*) SER_HARDWIRE="ser-base.o ser-tcp.o ser-mingw.o" ;;
esac
AC_SUBST(SER_HARDWIRE)
... I considered splitting filestuff.c similarly. But I quickly gave
up on the idea, as it looked like a lot more complication over this
approach, for no real gain. Plus, there are uses of these functions
outside the ser*.c framework.
gdbserver's configure.ac is already checking for sys/socket.h.
gdb/
2013-05-23 Pedro Alves <palves@redhat.com>
* common/filestuff.c [USE_WIN32API]: Define HAVE_SOCKETS.
[HAVE_SYS_SOCKET_H]: Define HAVE_SOCKETS.
(socket_mark_cloexec, gdb_socketpair_cloexec, gdb_socket_cloexec):
Only define if HAVE_SOCKETS is defined.
* configure.ac: Check for sys/socket.h.
* config.in, configure: Regenerate.
2013-05-23 18:37:00 +00:00
|
|
|
|
#ifdef HAVE_SOCKETS
|
|
|
|
|
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
/* Like maybe_mark_cloexec, but for callers that use SOCK_CLOEXEC. */
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
socket_mark_cloexec (int fd)
|
|
|
|
|
{
|
|
|
|
|
if (SOCK_CLOEXEC == 0 || trust_o_cloexec <= 0)
|
|
|
|
|
mark_cloexec (fd);
|
|
|
|
|
}
|
|
|
|
|
|
common/filestuff.c: No sockets on DJGPP.
Building gdb with --host=i586-pc-msdosdjgpp ends up with:
i586-pc-msdosdjgpp-gcc -g -O2 -I../../src/gdb/config/djgpp -I. -I../../src/gdb -I../../src/gdb/common -I../../src/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../src/gdb/../include/opcode -I../../src/gdb/../opcodes/.. -I../../src/gdb/../readline/.. -I../bfd -I../../src/gdb/../bfd -I../../src/gdb/../include -I../libdecnumber -I../../src/gdb/../libdecnumber -I./../intl -I../../src/gdb/gnulib/import -Ibuild-gnulib/import -Wall -Wdeclaration-after-statement -Wpointer-arith -Wformat-nonliteral -Wpointer-sign -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wmissing-prototypes -Wdeclaration-after-statement -Wempty-body -Werror -c -o filestuff.o -MT filestuff.o -MMD -MP -MF .deps/filestuff.Tpo ../../src/gdb/common/filestuff.c
../../src/gdb/common/filestuff.c:38:24: fatal error: sys/socket.h: No such file or directory
There are no sockets on djgpp. This #ifdef's out the bits in the file
that use sockets, depending on whether winsock or sys/socket.h is
available.
As alternative approach, given ser-tcp.c, ser-pipe.c, etc. are split
into separate files, and which to use is selected by configure.ac:
dnl Figure out which of the many generic ser-*.c files the _host_ supports.
SER_HARDWIRE="ser-base.o ser-unix.o ser-pipe.o ser-tcp.o"
case ${host} in
*go32* ) SER_HARDWIRE=ser-go32.o ;;
*djgpp* ) SER_HARDWIRE=ser-go32.o ;;
*mingw32*) SER_HARDWIRE="ser-base.o ser-tcp.o ser-mingw.o" ;;
esac
AC_SUBST(SER_HARDWIRE)
... I considered splitting filestuff.c similarly. But I quickly gave
up on the idea, as it looked like a lot more complication over this
approach, for no real gain. Plus, there are uses of these functions
outside the ser*.c framework.
gdbserver's configure.ac is already checking for sys/socket.h.
gdb/
2013-05-23 Pedro Alves <palves@redhat.com>
* common/filestuff.c [USE_WIN32API]: Define HAVE_SOCKETS.
[HAVE_SYS_SOCKET_H]: Define HAVE_SOCKETS.
(socket_mark_cloexec, gdb_socketpair_cloexec, gdb_socket_cloexec):
Only define if HAVE_SOCKETS is defined.
* configure.ac: Check for sys/socket.h.
* config.in, configure: Regenerate.
2013-05-23 18:37:00 +00:00
|
|
|
|
#endif
|
|
|
|
|
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* See filestuff.h. */
|
|
|
|
|
|
|
|
|
|
int
|
2013-04-23 15:49:25 +00:00
|
|
|
|
gdb_open_cloexec (const char *filename, int flags, unsigned long mode)
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
{
|
|
|
|
|
int fd = open (filename, flags | O_CLOEXEC, mode);
|
|
|
|
|
|
|
|
|
|
if (fd >= 0)
|
|
|
|
|
maybe_mark_cloexec (fd);
|
|
|
|
|
|
|
|
|
|
return fd;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* See filestuff.h. */
|
|
|
|
|
|
|
|
|
|
FILE *
|
|
|
|
|
gdb_fopen_cloexec (const char *filename, const char *opentype)
|
|
|
|
|
{
|
2013-10-09 16:00:54 +00:00
|
|
|
|
FILE *result;
|
2013-09-14 06:26:35 +00:00
|
|
|
|
/* Probe for "e" support once. But, if we can tell the operating
|
|
|
|
|
system doesn't know about close on exec mode "e" without probing,
|
|
|
|
|
skip it. E.g., the Windows runtime issues an "Invalid parameter
|
|
|
|
|
passed to C runtime function" OutputDebugString warning for
|
|
|
|
|
unknown modes. Assume that if O_CLOEXEC is zero, then "e" isn't
|
|
|
|
|
supported. */
|
2013-10-09 16:00:54 +00:00
|
|
|
|
static int fopen_e_ever_failed_einval = O_CLOEXEC == 0;
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
|
2013-10-09 16:00:54 +00:00
|
|
|
|
if (!fopen_e_ever_failed_einval)
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
{
|
|
|
|
|
char *copy;
|
|
|
|
|
|
|
|
|
|
copy = alloca (strlen (opentype) + 2);
|
|
|
|
|
strcpy (copy, opentype);
|
|
|
|
|
/* This is a glibc extension but we try it unconditionally on
|
|
|
|
|
this path. */
|
|
|
|
|
strcat (copy, "e");
|
|
|
|
|
result = fopen (filename, copy);
|
|
|
|
|
|
2013-10-09 16:00:54 +00:00
|
|
|
|
if (result == NULL && errno == EINVAL)
|
|
|
|
|
{
|
|
|
|
|
result = fopen (filename, opentype);
|
|
|
|
|
if (result != NULL)
|
|
|
|
|
fopen_e_ever_failed_einval = 1;
|
|
|
|
|
}
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
}
|
2013-10-09 16:00:54 +00:00
|
|
|
|
else
|
|
|
|
|
result = fopen (filename, opentype);
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
|
|
|
|
|
if (result != NULL)
|
|
|
|
|
maybe_mark_cloexec (fileno (result));
|
|
|
|
|
|
|
|
|
|
return result;
|
|
|
|
|
}
|
|
|
|
|
|
common/filestuff.c: No sockets on DJGPP.
Building gdb with --host=i586-pc-msdosdjgpp ends up with:
i586-pc-msdosdjgpp-gcc -g -O2 -I../../src/gdb/config/djgpp -I. -I../../src/gdb -I../../src/gdb/common -I../../src/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../src/gdb/../include/opcode -I../../src/gdb/../opcodes/.. -I../../src/gdb/../readline/.. -I../bfd -I../../src/gdb/../bfd -I../../src/gdb/../include -I../libdecnumber -I../../src/gdb/../libdecnumber -I./../intl -I../../src/gdb/gnulib/import -Ibuild-gnulib/import -Wall -Wdeclaration-after-statement -Wpointer-arith -Wformat-nonliteral -Wpointer-sign -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wmissing-prototypes -Wdeclaration-after-statement -Wempty-body -Werror -c -o filestuff.o -MT filestuff.o -MMD -MP -MF .deps/filestuff.Tpo ../../src/gdb/common/filestuff.c
../../src/gdb/common/filestuff.c:38:24: fatal error: sys/socket.h: No such file or directory
There are no sockets on djgpp. This #ifdef's out the bits in the file
that use sockets, depending on whether winsock or sys/socket.h is
available.
As alternative approach, given ser-tcp.c, ser-pipe.c, etc. are split
into separate files, and which to use is selected by configure.ac:
dnl Figure out which of the many generic ser-*.c files the _host_ supports.
SER_HARDWIRE="ser-base.o ser-unix.o ser-pipe.o ser-tcp.o"
case ${host} in
*go32* ) SER_HARDWIRE=ser-go32.o ;;
*djgpp* ) SER_HARDWIRE=ser-go32.o ;;
*mingw32*) SER_HARDWIRE="ser-base.o ser-tcp.o ser-mingw.o" ;;
esac
AC_SUBST(SER_HARDWIRE)
... I considered splitting filestuff.c similarly. But I quickly gave
up on the idea, as it looked like a lot more complication over this
approach, for no real gain. Plus, there are uses of these functions
outside the ser*.c framework.
gdbserver's configure.ac is already checking for sys/socket.h.
gdb/
2013-05-23 Pedro Alves <palves@redhat.com>
* common/filestuff.c [USE_WIN32API]: Define HAVE_SOCKETS.
[HAVE_SYS_SOCKET_H]: Define HAVE_SOCKETS.
(socket_mark_cloexec, gdb_socketpair_cloexec, gdb_socket_cloexec):
Only define if HAVE_SOCKETS is defined.
* configure.ac: Check for sys/socket.h.
* config.in, configure: Regenerate.
2013-05-23 18:37:00 +00:00
|
|
|
|
#ifdef HAVE_SOCKETS
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
/* See filestuff.h. */
|
|
|
|
|
|
|
|
|
|
int
|
|
|
|
|
gdb_socketpair_cloexec (int namespace, int style, int protocol, int filedes[2])
|
|
|
|
|
{
|
2013-04-23 15:49:25 +00:00
|
|
|
|
#ifdef HAVE_SOCKETPAIR
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
int result = socketpair (namespace, style | SOCK_CLOEXEC, protocol, filedes);
|
|
|
|
|
|
|
|
|
|
if (result != -1)
|
|
|
|
|
{
|
|
|
|
|
socket_mark_cloexec (filedes[0]);
|
|
|
|
|
socket_mark_cloexec (filedes[1]);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return result;
|
2013-04-23 15:49:25 +00:00
|
|
|
|
#else
|
|
|
|
|
gdb_assert_not_reached (_("socketpair not available on this host"));
|
|
|
|
|
#endif
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* See filestuff.h. */
|
|
|
|
|
|
|
|
|
|
int
|
|
|
|
|
gdb_socket_cloexec (int namespace, int style, int protocol)
|
|
|
|
|
{
|
|
|
|
|
int result = socket (namespace, style | SOCK_CLOEXEC, protocol);
|
|
|
|
|
|
|
|
|
|
if (result != -1)
|
|
|
|
|
socket_mark_cloexec (result);
|
|
|
|
|
|
|
|
|
|
return result;
|
|
|
|
|
}
|
common/filestuff.c: No sockets on DJGPP.
Building gdb with --host=i586-pc-msdosdjgpp ends up with:
i586-pc-msdosdjgpp-gcc -g -O2 -I../../src/gdb/config/djgpp -I. -I../../src/gdb -I../../src/gdb/common -I../../src/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../src/gdb/../include/opcode -I../../src/gdb/../opcodes/.. -I../../src/gdb/../readline/.. -I../bfd -I../../src/gdb/../bfd -I../../src/gdb/../include -I../libdecnumber -I../../src/gdb/../libdecnumber -I./../intl -I../../src/gdb/gnulib/import -Ibuild-gnulib/import -Wall -Wdeclaration-after-statement -Wpointer-arith -Wformat-nonliteral -Wpointer-sign -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wmissing-prototypes -Wdeclaration-after-statement -Wempty-body -Werror -c -o filestuff.o -MT filestuff.o -MMD -MP -MF .deps/filestuff.Tpo ../../src/gdb/common/filestuff.c
../../src/gdb/common/filestuff.c:38:24: fatal error: sys/socket.h: No such file or directory
There are no sockets on djgpp. This #ifdef's out the bits in the file
that use sockets, depending on whether winsock or sys/socket.h is
available.
As alternative approach, given ser-tcp.c, ser-pipe.c, etc. are split
into separate files, and which to use is selected by configure.ac:
dnl Figure out which of the many generic ser-*.c files the _host_ supports.
SER_HARDWIRE="ser-base.o ser-unix.o ser-pipe.o ser-tcp.o"
case ${host} in
*go32* ) SER_HARDWIRE=ser-go32.o ;;
*djgpp* ) SER_HARDWIRE=ser-go32.o ;;
*mingw32*) SER_HARDWIRE="ser-base.o ser-tcp.o ser-mingw.o" ;;
esac
AC_SUBST(SER_HARDWIRE)
... I considered splitting filestuff.c similarly. But I quickly gave
up on the idea, as it looked like a lot more complication over this
approach, for no real gain. Plus, there are uses of these functions
outside the ser*.c framework.
gdbserver's configure.ac is already checking for sys/socket.h.
gdb/
2013-05-23 Pedro Alves <palves@redhat.com>
* common/filestuff.c [USE_WIN32API]: Define HAVE_SOCKETS.
[HAVE_SYS_SOCKET_H]: Define HAVE_SOCKETS.
(socket_mark_cloexec, gdb_socketpair_cloexec, gdb_socket_cloexec):
Only define if HAVE_SOCKETS is defined.
* configure.ac: Check for sys/socket.h.
* config.in, configure: Regenerate.
2013-05-23 18:37:00 +00:00
|
|
|
|
#endif
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
|
|
|
|
|
/* See filestuff.h. */
|
|
|
|
|
|
|
|
|
|
int
|
|
|
|
|
gdb_pipe_cloexec (int filedes[2])
|
|
|
|
|
{
|
|
|
|
|
int result;
|
|
|
|
|
|
|
|
|
|
#ifdef HAVE_PIPE2
|
|
|
|
|
result = pipe2 (filedes, O_CLOEXEC);
|
|
|
|
|
if (result != -1)
|
|
|
|
|
{
|
|
|
|
|
maybe_mark_cloexec (filedes[0]);
|
|
|
|
|
maybe_mark_cloexec (filedes[1]);
|
|
|
|
|
}
|
|
|
|
|
#else
|
2013-04-23 15:49:25 +00:00
|
|
|
|
#ifdef HAVE_PIPE
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
result = pipe (filedes);
|
|
|
|
|
if (result != -1)
|
|
|
|
|
{
|
|
|
|
|
mark_cloexec (filedes[0]);
|
|
|
|
|
mark_cloexec (filedes[1]);
|
|
|
|
|
}
|
2013-04-23 15:49:25 +00:00
|
|
|
|
#else /* HAVE_PIPE */
|
|
|
|
|
gdb_assert_not_reached (_("pipe not available on this host"));
|
|
|
|
|
#endif /* HAVE_PIPE */
|
|
|
|
|
#endif /* HAVE_PIPE2 */
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
|
|
|
|
|
|
|
|
|
return result;
|
|
|
|
|
}
|