old-cross-binutils/gdb/testsuite/gdb.trace/trace-condition.exp

# Copyright 2011-2015 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

load_lib "trace-support.exp"

standard_testfile
set executable $testfile
set expfile $testfile.exp

# Some targets have leading underscores on assembly symbols.
set additional_flags [gdb_target_symbol_prefix_flags]

if [is_amd64_regs_target] {
    set pcreg "\$rip"
} elseif [is_x86_like_target] {
    set pcreg "\$eip"
} elseif [is_aarch64_target] {
    set pcreg "\$pc"
} else {
    set pcreg "\$pc"
}

if [prepare_for_testing $expfile $executable $srcfile \
	[list debug $additional_flags]] {
    untested "failed to prepare for trace tests"
    return -1
}

if ![runto_main] {
    fail "Can't run to main to check for trace support"
    return -1
}

if ![gdb_target_supports_trace] {
    unsupported "target does not support trace"
    return -1
}

set libipa [get_in_proc_agent]
gdb_load_shlibs $libipa

# Can't use prepare_for_testing, because that splits compiling into
# building objects and then linking, and we'd fail with "linker input
# file unused because linking not done" when building the object.

if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
	  executable [list debug $additional_flags shlib=$libipa] ] != "" } {
    untested "failed to compile ftrace tests"
    return -1
}

clean_restart ${executable}

if ![runto_main] {
    fail "Can't run to main for ftrace tests"
    return 0
}

if { [gdb_test "info sharedlibrary" ".*${libipa}.*" "IPA loaded"] != 0 } {
    untested "Could not find IPA lib loaded"
    return 1
}

proc test_tracepoints { trace_command condition num_frames { kfail_proc 0 } } {
    global executable gdb_prompt

    clean_restart ${executable}

    if ![runto_main] {
	fail "Can't run to main for ftrace tests"
	return 0
    }

    gdb_test "break begin" ".*" ""

    gdb_test "break end" ".*" ""

    with_test_prefix "${trace_command}: ${condition}" {

	gdb_test "${trace_command} set_point if ${condition}" \
	    "\(Fast t|T\)racepoint .*" \
	    "set tracepoint"

	gdb_test "continue" ".*Breakpoint \[0-9\]+, begin .*" \
	    "advance to trace begin"

	gdb_test_no_output "tstart" "start trace experiment"

	gdb_test_multiple "continue" "advance through tracing" {
	    -re ".*Breakpoint \[0-9\]+, end .*$gdb_prompt $" {
		pass "advance through tracing"
	    }
	    -re "Program received signal SIGSEGV, Segmentation fault\\..*$gdb_prompt $" {
		if { $kfail_proc != 0 } {
		    $kfail_proc $trace_command
		}
		fail "advance through tracing"
	    }
	}

	if { $kfail_proc != 0 } {
	    $kfail_proc $trace_command
	}
	gdb_test "tstatus" \
	    ".*Trace .*Collected $num_frames .*" \
	    "check $num_frames frames were collected."

	gdb_test "tstop" "" ""
    }
}

# These callbacks identify known failures for certain architectures.  They
# are called either if GDBserver crashes or has not traced the correct
# number of frames.

proc 18955_x86_64_failure { trace_command } {
    if { $trace_command == "ftrace" } {
	setup_kfail "gdb/18955" "x86_64-*-linux*"
    }
}

proc 18955_i386_failure { trace_command } {
    if { $trace_command == "ftrace" } {
	setup_kfail "gdb/18955" "i\[34567\]86-*-*"
    }
}

foreach trace_command { "trace" "ftrace" } {
    # This condition is always true as the PC should be set to the tracepoint
    # address when hit.
    test_tracepoints $trace_command "$pcreg == *set_point" 10

    # Can we read local variables?
    test_tracepoints $trace_command "anarg == 100 || anarg == 200" 2 18955_x86_64_failure
    # Can we read global variables?
    test_tracepoints $trace_command "anarg == 100 && globvar == 1" 1 18955_x86_64_failure

    # Test various operations to cover as many opcodes as possible.
    test_tracepoints $trace_command "21 + 21 == 42" 10
    test_tracepoints $trace_command "21 - 21 == 0" 10
    test_tracepoints $trace_command "21 * 2 == 42" 10
    test_tracepoints $trace_command "21 << 1 == 42" 10
    test_tracepoints $trace_command "42 >> 1 == 21" 10
    test_tracepoints $trace_command "-21 << 1 == -42" 10
    test_tracepoints $trace_command "-42 >> 1 == -21" 10
    test_tracepoints $trace_command "(0xabababab & 0x0000ffff) == 0xabab" 10
    test_tracepoints $trace_command "(0xabababab | 0x0000ffff) == 0xababffff" 10
    test_tracepoints $trace_command "(0xaaaaaaaa ^ 0x55555555) == 0xffffffff" 10
    test_tracepoints $trace_command "~0xaaaaaaaa == 0x55555555" 10
    test_tracepoints $trace_command "21 < 42" 10
    test_tracepoints $trace_command "42 <= 42" 10
    test_tracepoints $trace_command "42 >= 42" 10
    test_tracepoints $trace_command "42 > 21" 10
    test_tracepoints $trace_command "(21 < 42 ? 0 : 1) == 0" 10 18955_i386_failure
    test_tracepoints $trace_command "(42 <= 42 ? 0 : 1) == 0" 10
    test_tracepoints $trace_command "(42 >= 42 ? 0 : 1) == 0" 10
    test_tracepoints $trace_command "(42 > 21 ? 0 : 1) == 0" 10 18955_i386_failure
    test_tracepoints $trace_command "\$trace_timestamp >= 0" 10
}