old-cross-binutils/gdb/testsuite/gdb.reverse/until-precsave.exp

152 lines
4.5 KiB
Text
Raw Normal View History

# Copyright 2008-2015 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>. */
# This file is part of the GDB testsuite. It tests 'until' and
# 'advance' in precord logfile.
# This test suitable only for process record-replay
if ![supports_process_record] {
return
}
* gdb.reverse/break-precsave.exp: Use standard_testfile. * gdb.reverse/break-reverse.exp: Use standard_testfile. * gdb.reverse/consecutive-precsave.exp: Use standard_testfile. * gdb.reverse/consecutive-reverse.exp: Use standard_testfile. * gdb.reverse/finish-precsave.exp: Use standard_testfile. * gdb.reverse/finish-reverse-bkpt.exp: Use standard_testfile. * gdb.reverse/finish-reverse.exp: Use standard_testfile. * gdb.reverse/i386-precsave.exp: Use standard_testfile, prepare_for_testing. * gdb.reverse/i386-reverse.exp: Use standard_testfile, prepare_for_testing. * gdb.reverse/i386-sse-reverse.exp: Use standard_testfile, prepare_for_testing. * gdb.reverse/i387-env-reverse.exp: Use standard_testfile, prepare_for_testing. * gdb.reverse/i387-stack-reverse.exp: Use standard_testfile, prepare_for_testing * gdb.reverse/machinestate-precsave.exp: Use standard_testfile. * gdb.reverse/machinestate.exp: Use standard_testfile. * gdb.reverse/next-reverse-bkpt-over-sr.exp: Use standard_testfile. * gdb.reverse/sigall-precsave.exp: Use standard_testfile, build_executable. * gdb.reverse/sigall-reverse.exp: Use standard_testfile, build_executable. * gdb.reverse/solib-precsave.exp: Use standard_testfile, standard_output_file. * gdb.reverse/solib-reverse.exp: Use standard_testfile, standard_output_file. * gdb.reverse/step-precsave.exp: Use standard_testfile. * gdb.reverse/step-reverse.exp: Use standard_testfile. * gdb.reverse/until-precsave.exp: Use standard_testfile. * gdb.reverse/until-reverse.exp: Use standard_testfile. * gdb.reverse/watch-precsave.exp: Use standard_testfile. * gdb.reverse/watch-reverse.exp: Use standard_testfile.
2012-06-26 17:54:59 +00:00
standard_testfile until-reverse.c ur1.c
set precsave [standard_output_file until.precsave]
* gdb.reverse/break-precsave.exp: Use standard_testfile. * gdb.reverse/break-reverse.exp: Use standard_testfile. * gdb.reverse/consecutive-precsave.exp: Use standard_testfile. * gdb.reverse/consecutive-reverse.exp: Use standard_testfile. * gdb.reverse/finish-precsave.exp: Use standard_testfile. * gdb.reverse/finish-reverse-bkpt.exp: Use standard_testfile. * gdb.reverse/finish-reverse.exp: Use standard_testfile. * gdb.reverse/i386-precsave.exp: Use standard_testfile, prepare_for_testing. * gdb.reverse/i386-reverse.exp: Use standard_testfile, prepare_for_testing. * gdb.reverse/i386-sse-reverse.exp: Use standard_testfile, prepare_for_testing. * gdb.reverse/i387-env-reverse.exp: Use standard_testfile, prepare_for_testing. * gdb.reverse/i387-stack-reverse.exp: Use standard_testfile, prepare_for_testing * gdb.reverse/machinestate-precsave.exp: Use standard_testfile. * gdb.reverse/machinestate.exp: Use standard_testfile. * gdb.reverse/next-reverse-bkpt-over-sr.exp: Use standard_testfile. * gdb.reverse/sigall-precsave.exp: Use standard_testfile, build_executable. * gdb.reverse/sigall-reverse.exp: Use standard_testfile, build_executable. * gdb.reverse/solib-precsave.exp: Use standard_testfile, standard_output_file. * gdb.reverse/solib-reverse.exp: Use standard_testfile, standard_output_file. * gdb.reverse/step-precsave.exp: Use standard_testfile. * gdb.reverse/step-reverse.exp: Use standard_testfile. * gdb.reverse/until-precsave.exp: Use standard_testfile. * gdb.reverse/until-reverse.exp: Use standard_testfile. * gdb.reverse/watch-precsave.exp: Use standard_testfile. * gdb.reverse/watch-reverse.exp: Use standard_testfile.
2012-06-26 17:54:59 +00:00
if { [prepare_for_testing $testfile.exp $testfile \
[list $srcfile $srcfile2]] } {
return -1
}
set bp_location1 [gdb_get_line_number "set breakpoint 1 here"]
set bp_location7 [gdb_get_line_number "set breakpoint 7 here"]
set bp_location8 [gdb_get_line_number "set breakpoint 8 here" "$srcfile2"]
set bp_location19 [gdb_get_line_number "set breakpoint 19 here"]
set bp_location20 [gdb_get_line_number "set breakpoint 20 here"]
set bp_location21 [gdb_get_line_number "set breakpoint 21 here"]
runto main
if [supports_process_record] {
# Activate process record/replay
2010-05-28 Michael Snyder <msnyder@msnyder-server.eng.vmware.com> * gdb.reverse/break-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/break-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/consecutive-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/consecutive-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/finish-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/finish-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/i386-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/i386-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/i386-sse-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/i387-env-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/i387-stack-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/machinestate-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/machinestate.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/sigall-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/sigall-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/solib-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/solib-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/step-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/step-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/until-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/until-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/watch-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/watch-reverse.exp: Replace uses of send_gdb / gdb_expect.
2010-05-28 18:26:41 +00:00
gdb_test_no_output "record" "Turn on process record"
}
set end_of_main [gdb_get_line_number "set breakpoint 10a here" ]
gdb_test "break $end_of_main" \
Fix mingw32 failures due to incorrect directory separator in pattern Some testcases, mostly gdb.reverse ones, assume the presence of a '/' directory separator before the source file name. This is incorrect for mingw32 hosts, generating false failures for those tests. I attempted to catch most of the occurrences of the pattern ".*/$srcfile" and replaced them with ".*$srcfile". The latter is used elsewhere in the testsuite. The resulting patch is attached. I also see other occurrences of the same assumption throughout the testsuite, but usually they are arguments for function calls and i seem to recall either the test harness or GDB deals with those paths properly. gdb/testsuite: 2014-10-17 Luis Machado <lgustavo@codesourcery.com> * gdb.guile/scm-breakpoint.exp: Do not assume any directory separators when matching source file paths. * gdb.python/py-breakpoint.exp: Likewise. * gdb.reverse/break-precsave.exp: Likewise. * gdb.reverse/break-reverse.exp: Likewise. * gdb.reverse/consecutive-precsave.exp: Likewise. * gdb.reverse/finish-precsave.exp: Likewise. * gdb.reverse/finish-reverse-bkpt.exp: Likewise. * gdb.reverse/finish-reverse.exp: Likewise. * gdb.reverse/i386-precsave.exp: Likewise. * gdb.reverse/i387-env-reverse.exp: Likewise. * gdb.reverse/i387-stack-reverse.exp: Likewise. * gdb.reverse/machinestate-precsave.exp: Likewise. * gdb.reverse/machinestate.exp: Likewise. * gdb.reverse/sigall-precsave.exp: Likewise. * gdb.reverse/solib-precsave.exp: Likewise. * gdb.reverse/step-precsave.exp: Likewise. * gdb.reverse/until-precsave.exp: Likewise. * gdb.reverse/watch-precsave.exp: Likewise. * gdb.reverse/watch-reverse.exp: Likewise.
2014-10-17 14:28:17 +00:00
"Breakpoint $decimal at .*$srcfile, line $end_of_main\." \
"BP at end of main"
# This can take awhile.
with_timeout_factor 20 {
gdb_test "continue" "Breakpoint .* set breakpoint 10a here .*" "run to end of main"
GDB/testsuite: Add/correct gdb.reverse timeout tweaks There are three cases in two scripts in the gdb.reverse subset that take a particularly long time. Two of them are already attempted to take care of by extending the timeout from the default. The remaining one has no precautions taken. The timeout extension is ineffective though, it is done by adding a constant rather than by scaling and as a result while it may work for target boards that get satisfied with the detault test timeout of 10s, it does not serve its purpose for slower ones. Here are indicative samples of execution times (in seconds) observed for these cases respectively, for an ARMv7 Panda board running Linux and a `-march=armv5te' multilib: PASS: gdb.reverse/sigall-reverse.exp: continue to signal exit elapsed: 385 PASS: gdb.reverse/until-precsave.exp: run to end of main elapsed: 4440 PASS: gdb.reverse/until-precsave.exp: save process recfile elapsed: 965 for the same board and a `-mthumb -march=armv5te' multilib: PASS: gdb.reverse/sigall-reverse.exp: continue to signal exit elapsed: 465 PASS: gdb.reverse/until-precsave.exp: run to end of main elapsed: 4191 PASS: gdb.reverse/until-precsave.exp: save process recfile elapsed: 669 and for QEMU in the system emulation mode and a `-march=armv4t' multilib: PASS: gdb.reverse/sigall-reverse.exp: continue to signal exit elapsed: 45 PASS: gdb.reverse/until-precsave.exp: run to end of main elapsed: 433 PASS: gdb.reverse/until-precsave.exp: save process recfile elapsed: 104 Based on the performance of other tests these two test configurations have their default timeout set to 450s and 60s respectively. The remaining two multilibs (`-mthumb -march=armv4t' and `-mthumb -march=armv7-a') do not produce test results usable enough to have data available for these cases. Based on these results I have tweaked timeouts for these cases as follows. This, together with a suitable board timeout setting, removes timeouts for these cases. Note that for the default timeout of 10s the new setting for the first case in gdb.reverse/until-precsave.exp is compatible with the old one, just a bit higher to keep the convention of longer timeouts to remain multiples of 30s. The second case there does not need such a high setting so I have lowered it a bit to avoid an unnecessary delay where this test case genuinely times out. * gdb.reverse/sigall-reverse.exp: Increase the timeout by a factor of 2 for a slow test case. Take the `gdb,timeout' target setting into account for this calculation. * gdb.reverse/until-precsave.exp: Increase the timeout by a factor of 15 and 3 respectively rather than adding 120 for a pair of slow test cases. Take the `gdb,timeout' target setting into account for this calculation.
2014-09-09 16:03:24 +00:00
}
# So can this, against gdbserver, for example.
with_timeout_factor 10 {
gdb_test "record save $precsave" \
"Saved core file $precsave with execution log\." \
"save process recfile"
}
gdb_test "kill" "" "Kill process, prepare to debug log file" \
"Kill the program being debugged\\? \\(y or n\\) " "y"
gdb_test "record restore $precsave" \
I caught a few mingw32-specific failures for some of the gdb.reverse tests. FAIL: gdb.reverse/consecutive-precsave.exp: reload precord save file FAIL: gdb.reverse/finish-precsave.exp: reload precord save file FAIL: gdb.reverse/until-precsave.exp: reload core file FAIL: gdb.reverse/watch-precsave.exp: reload core file FAIL: gdb.reverse/step-precsave.exp: reload core file FAIL: gdb.reverse/break-precsave.exp: reload precord save file FAIL: gdb.reverse/sigall-precsave.exp: reload precord save file They happen for two reasons. - mingw32 does not define SIGTRAP, so upon recording a core file, the signal information will be missing, which in turn causes GDB to not display the stopping signal when it loads the same core file. An earlier message warns about this: "warning: Signal SIGTRAP does not exist on this system." - The testcase is crafted in a way that expects a pattern of the stopping signal message instead of a successful core file read message. The following patch fixes this by changing the old pattern to a more reasonable one, while still ignoring the fact that mingw32-based GDB does not record a SIGTRAP in a core file because it does not define it. gdb/testsuite/ 2014-11-18 Luis Machado <lgustavo@codesourcery.com> * gdb.reverse/break-precsave: Expect completion message for core file reads. * gdb.reverse/consecutive-precsave.exp: Likewise. * gdb.reverse/finish-precsave.exp: Likewise. * gdb.reverse/i386-precsave.exp: Likewise. * gdb.reverse/machinestate-precsave.exp: Likewise. * gdb.reverse/sigall-precsave.exp: Likewise. * gdb.reverse/solib-precsave.exp: Likewise. * gdb.reverse/step-precsave.exp: Likewise. * gdb.reverse/until-precsave.exp: Likewise. * gdb.reverse/watch-precsave.exp: Likewise.
2014-11-18 13:16:37 +00:00
"Restored records from core file .*" \
"reload core file"
# Verify that plain vanilla "until <location>" works.
#
gdb_test "until $bp_location1" \
"main .* at .*:$bp_location1.*" \
"until line number"
# Advance up to factorial, outer invocation
#
gdb_test "advance factorial" \
"factorial .value=6..*$srcfile:$bp_location7.*" \
"advance to factorial"
# At this point, 'until' should continue the inferior up to when all the
# inner invocations of factorial() are completed and we are back at this
# frame.
#
gdb_test "until $bp_location19" \
"factorial .value=720.*${srcfile}:$bp_location19.*" \
"until factorial, recursive function"
# Finish out to main scope
#
gdb_test "finish" \
" in main .*$srcfile:$bp_location1.*" \
"finish to main"
# Advance to a function called by main (marker2)
#
gdb_test "advance marker2" \
"marker2 .a=43.*$srcfile2:$bp_location8.*" \
"advance to marker2"
# Now issue an until with another function, not called by the current
# frame, as argument. This should not work, i.e. the program should
# stop at main, the caller, where we put the 'guard' breakpoint.
#
set test_msg "until func, not called by current frame"
gdb_test_multiple "until marker3" "$test_msg" {
-re "main .*at .*${srcfile}:$bp_location20.*$gdb_prompt $" {
pass "$test_msg"
}
-re "main .*at .*${srcfile}:$bp_location21.*$gdb_prompt $" {
pass "$test_msg"
}
}
###
###
###
# Set reverse execution direction
2010-05-28 Michael Snyder <msnyder@msnyder-server.eng.vmware.com> * gdb.reverse/break-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/break-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/consecutive-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/consecutive-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/finish-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/finish-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/i386-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/i386-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/i386-sse-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/i387-env-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/i387-stack-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/machinestate-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/machinestate.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/sigall-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/sigall-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/solib-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/solib-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/step-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/step-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/until-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/until-reverse.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/watch-precsave.exp: Replace uses of send_gdb / gdb_expect. * gdb.reverse/watch-reverse.exp: Replace uses of send_gdb / gdb_expect.
2010-05-28 18:26:41 +00:00
gdb_test_no_output "set exec-dir reverse" "set reverse execution"
#
# We should now be at main, after the return from marker2.
# "Advance" backward into marker2.
#
gdb_test "advance marker2" \
"marker2 .a=43.*$srcfile2:$bp_location8.*" \
"reverse-advance to marker2"
# Finish out to main scope (backward)
gdb_test "finish" \
" in main .*$srcfile:$bp_location20.*" \
"reverse-finish from marker2"
# Advance backward to last line of factorial (outer invocation)
gdb_test "advance $bp_location19" \
"factorial .value=720.*${srcfile}:$bp_location19.*" \
"reverse-advance to final return of factorial"
# Now do "until" across the recursive calls,
# ending up in the same frame where we are now.
gdb_test "until $bp_location7" \
"factorial .value=6..*$srcfile:$bp_location7.*" \
"reverse-until to entry of factorial"