msm8937-common: Update GPS stack to O-MR1
* From bardock-pro - OPM1.171019.011
This commit is contained in:
Bruno Martins
Isaac Chen
parent
b3d607b848
commit
e3a264221a
11 changed files with 295 additions and 190 deletions
|
|
@ -1,3 +1,3 @@
|
|||
# GPS
|
||||
BOARD_VENDOR_QCOM_GPS_LOC_API_HARDWARE := true
|
||||
USE_DEVICE_SPECIFIC_GPS := true
|
||||
TARGET_NO_RPC := true
|
||||
|
|
|
|||
44
gps/etc/apdr.conf
Normal file
44
gps/etc/apdr.conf
Normal file
|
|
@ -0,0 +1,44 @@
|
|||
# AP DR SENSOR Configuration file
|
||||
#
|
||||
# SENSOR_SERVICE options are one of below
|
||||
# accel,gyro,vehicle_accel,vehicle_gyro,pedometer,vehicle_odometry,accel_temp,
|
||||
# gyro_temp,baro,mag_calib,mag_uncalib,amd,rmd.
|
||||
#
|
||||
# SENSOR_PROVIDER options is one of -- default,native,ssc,samlite.
|
||||
#
|
||||
# SENSOR_RATE = 1~100 (Hz)
|
||||
#
|
||||
# SENSOR_SAMPLES = 1~N
|
||||
#
|
||||
# SENSOR_STATISTIC_ENABLED
|
||||
# bit 0: Diag Print Enabled
|
||||
# bit 1: Adb Print Enabled
|
||||
# SENSOR_STATISTIC_PRINT_COUNT
|
||||
# Skip Number of Print
|
||||
#
|
||||
|
||||
SENSOR_SERVICE = accel
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 100
|
||||
SENSOR_SAMPLES = 1
|
||||
SENSOR_STATISTIC_ENABLED = 3
|
||||
SENSOR_STATISTIC_PRINT_COUNT = 50
|
||||
|
||||
SENSOR_SERVICE = vehicle_accel
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 10
|
||||
SENSOR_SAMPLES = 1
|
||||
SENSOR_STATISTIC_ENABLED = 3
|
||||
SENSOR_STATISTIC_PRINT_COUNT = 50
|
||||
|
||||
SENSOR_SERVICE = gyro
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 100
|
||||
SENSOR_SAMPLES = 1
|
||||
SENSOR_STATISTIC_ENABLED = 3
|
||||
SENSOR_STATISTIC_PRINT_COUNT = 50
|
||||
|
||||
GNSS_POS_STATISTIC_ENABLED = 3
|
||||
GNSS_POS_STATISTIC_PRNTCNT = 10
|
||||
GNSS_MSR_STATISTIC_ENABLED = 3
|
||||
GNSS_MSR_STATISTIC_PRNTCNT = 10
|
||||
|
|
@ -14,6 +14,16 @@
|
|||
# batch size defined as 20 as below.
|
||||
BATCH_SIZE=20
|
||||
|
||||
# The number of batched locations
|
||||
# requested to modem for outdoor
|
||||
# trip batching. The desired number
|
||||
# defined below may not be satisfied, as
|
||||
# the modem can only return the number
|
||||
# of batched locations that can be allocated,
|
||||
# which is limited by memory. The default
|
||||
# trip batch size defined as 600 as below.
|
||||
OUTDOOR_TRIP_BATCH_SIZE=600
|
||||
|
||||
###################################
|
||||
# FLP BATCHING SESSION TIMEOUT
|
||||
###################################
|
||||
|
|
@ -58,3 +68,24 @@ ACCURACY=1
|
|||
# 2: MEDIUM responsiveness
|
||||
# 3: HIGH responsiveness
|
||||
FLP_GEOFENCE_RESPONSIVENESS_OVERRIDE = 0
|
||||
|
||||
####################################
|
||||
# By default APPS must support LB only if modem support
|
||||
# LB 1.5 and above. This parameter adds an exception
|
||||
# for targets where modem only supports LB 1.0.
|
||||
# This might be useful for primarily outdoor devices.
|
||||
# 0: MUST NOT ALLOW LB IF MODEM ONLY SUPPORTS
|
||||
# LB 1.0
|
||||
# 1: ALLOW LB IF MODEM ONLY SUPPORTS LB 1.0
|
||||
####################################
|
||||
ALLOW_LB_1_0 = 0
|
||||
|
||||
####################################
|
||||
# By default if network fixes are not sensor assisted
|
||||
# these fixes must be dropped. This parameter adds an exception
|
||||
# for targets where there is no PDR and we still want to
|
||||
# report out network fixes
|
||||
# 0: MUST NOT ALLOW NETWORK FIXES
|
||||
# 1: ALLOW NETWORK FIXES
|
||||
####################################
|
||||
ALLOW_NETWORK_FIXES = 0
|
||||
|
|
|
|||
|
|
@ -1,4 +1,5 @@
|
|||
#URLs from which to download XTRA data
|
||||
#Uncommenting these urls would only enable
|
||||
#the power up auto injection and force injection(test case).
|
||||
XTRA_SERVER_1=https://xtrapath1.izatcloud.net/xtra3grc.bin
|
||||
XTRA_SERVER_2=https://xtrapath2.izatcloud.net/xtra3grc.bin
|
||||
XTRA_SERVER_3=https://xtrapath3.izatcloud.net/xtra3grc.bin
|
||||
|
|
@ -8,7 +9,7 @@ XTRA_SERVER_3=https://xtrapath3.izatcloud.net/xtra3grc.bin
|
|||
#AUTO = 1
|
||||
#XTRA2 = 2
|
||||
#XTRA3 = 3
|
||||
XTRA_VERSION_CHECK=1
|
||||
XTRA_VERSION_CHECK=0
|
||||
|
||||
# Error Estimate
|
||||
# _SET = 1
|
||||
|
|
@ -24,7 +25,7 @@ XTRA_CA_PATH=/system/etc/security/cacerts
|
|||
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
|
||||
# 4 - Debug, 5 - Verbose
|
||||
# If DEBUG_LEVEL is commented, Android's logging levels will be used
|
||||
DEBUG_LEVEL = 3
|
||||
DEBUG_LEVEL = 2
|
||||
|
||||
# Intermediate position report, 1=enable, 0=disable
|
||||
INTERMEDIATE_POS=0
|
||||
|
|
@ -34,25 +35,25 @@ INTERMEDIATE_POS=0
|
|||
# Set bit 0x1 if MO GPS functionalities are to be locked
|
||||
# Set bit 0x2 if NI GPS functionalities are to be locked
|
||||
# default - non is locked for backward compatibility
|
||||
#GPS_LOCK = 0
|
||||
GPS_LOCK = 3
|
||||
|
||||
# supl version 1.0
|
||||
SUPL_VER=0x10000
|
||||
# supl version 2.0
|
||||
SUPL_VER=0x20000
|
||||
|
||||
# Emergency SUPL, 1=enable, 0=disable
|
||||
SUPL_ES=0
|
||||
#SUPL_ES=0
|
||||
|
||||
#Choose PDN for Emergency SUPL
|
||||
#1 - Use emergency PDN
|
||||
#0 - Use regular SUPL PDN for Emergency SUPL
|
||||
USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
|
||||
#USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
|
||||
|
||||
#SUPL_MODE is a bit mask set in config.xml per carrier by default.
|
||||
#If it is uncommented here, this value will overwrite the value from
|
||||
#config.xml.
|
||||
#MSA=0X2
|
||||
#MSB=0X1
|
||||
#SUPL_MODE=
|
||||
SUPL_MODE=1
|
||||
|
||||
# GPS Capabilities bit mask
|
||||
# SCHEDULING = 0x01
|
||||
|
|
@ -72,8 +73,8 @@ CAPABILITIES=0x37
|
|||
################################
|
||||
|
||||
# FOR SUPL SUPPORT, set the following
|
||||
# SUPL_HOST=supl.host.com or IP
|
||||
# SUPL_PORT=1234
|
||||
SUPL_HOST=supl.google.com
|
||||
SUPL_PORT=7275
|
||||
|
||||
# FOR C2K PDE SUPPORT, set the following
|
||||
# C2K_HOST=c2k.pde.com or IP
|
||||
|
|
@ -117,6 +118,8 @@ A_GLONASS_POS_PROTOCOL_SELECT = 0
|
|||
##################################################
|
||||
# 0x1: DBH for LPPe CP
|
||||
# 0x2: WLAN AP Measurements for LPPe CP
|
||||
# 0x4: SRN AP measurement for CP
|
||||
# 0x8: Sensor Barometer Measurement LPPe CP
|
||||
LPPE_CP_TECHNOLOGY = 0
|
||||
|
||||
##################################################
|
||||
|
|
@ -124,6 +127,8 @@ LPPE_CP_TECHNOLOGY = 0
|
|||
##################################################
|
||||
# 0x1: DBH for LPPe UP
|
||||
# 0x2: WLAN AP Measurements for LPPe UP
|
||||
# 0x4: SRN AP measurement for UP
|
||||
# 0x8: Sensor Barometer Measurement LPPe UP
|
||||
LPPE_UP_TECHNOLOGY = 0
|
||||
|
||||
##################################################
|
||||
|
|
@ -140,18 +145,30 @@ LPPE_UP_TECHNOLOGY = 0
|
|||
# 0: disable
|
||||
# 1: enable
|
||||
AGPS_CONFIG_INJECT = 1
|
||||
|
||||
##################################################
|
||||
# GNSS settings for automotive use cases
|
||||
# Configurations in following section are
|
||||
# specific to automotive use cases, others
|
||||
# please do not change, keep the default values
|
||||
##################################################
|
||||
|
||||
##################################################
|
||||
# AP Coarse Timestamp Uncertainty
|
||||
##################################################
|
||||
# default : 10
|
||||
# or as per clock uncertainty of product
|
||||
# AP time stamp uncertainty, until GNSS receiver
|
||||
# is able to acquire better timing information
|
||||
AP_TIMESTAMP_UNCERTAINTY = 10
|
||||
|
||||
#####################################
|
||||
# GNSS PPS settings
|
||||
#####################################
|
||||
#AP DR engine availability status
|
||||
# 0 : NO AP DR (default)
|
||||
# 1 : AP DR enabled
|
||||
##################################################
|
||||
# QDR engine availability status
|
||||
##################################################
|
||||
# 0 : NO QDR (default)
|
||||
# 1 : QDR enabled
|
||||
# This settings enables QDR Configuration for
|
||||
# automotive use case, if enabled then
|
||||
# DR_AP_Service needs to be enabled in izat.con
|
||||
#EXTERNAL_DR_ENABLED = 0
|
||||
|
||||
#####################################
|
||||
|
|
@ -159,6 +176,9 @@ AP_TIMESTAMP_UNCERTAINTY = 10
|
|||
#####################################
|
||||
# 0 : DR_SYNC pulse not available (default)
|
||||
# 1 : DR_SYNC pulse available
|
||||
# This configuration enables the driver to make use
|
||||
# of PPS events generated by DR_SYNC pulse
|
||||
# Standard Linux PPS driver needs to be enabled
|
||||
DR_SYNC_ENABLED = 0
|
||||
|
||||
#####################################
|
||||
|
|
@ -169,14 +189,20 @@ PPS_DEVICENAME = /dev/pps0
|
|||
#####################################
|
||||
# AP Clock Accuracy
|
||||
#####################################
|
||||
# Quality of APPS processor clock (in PPM).
|
||||
# Value specified is used for calculation of
|
||||
# APPS time stamp uncertainty
|
||||
AP_CLOCK_PPM = 100
|
||||
|
||||
#####################################
|
||||
# MAX ms difference to detect missing pulse
|
||||
#####################################
|
||||
# Specifies time threshold in ms to validate any missing PPS pulses
|
||||
MISSING_PULSE_TIME_DELTA = 900
|
||||
|
||||
#####################################
|
||||
# Propagation time uncertainty
|
||||
#####################################
|
||||
# This settings enables time uncertainty propagation
|
||||
# logic incase of missing PPS pulse
|
||||
PROPAGATION_TIME_UNCERTAINTY = 1
|
||||
|
|
|
|||
|
|
@ -9,10 +9,18 @@ IZAT_DEBUG_LEVEL = 2
|
|||
##################################################
|
||||
WIFI_WAIT_TIMEOUT_SELECT = 0
|
||||
|
||||
##################################################
|
||||
# Time interval of injecting SRN scan data to modem
|
||||
# time in seconds.
|
||||
# Note: recommended value is between 1-5 sec
|
||||
##################################################
|
||||
LPPE_SRN_DATA_SCAN_INJECT_TIME=2
|
||||
|
||||
################################
|
||||
# NLP Settings
|
||||
################################
|
||||
# NLP_MODE 1: OSNLP Only, 2: QNP Only, 3: Combo, 4: QNP preferred
|
||||
# For Automotive products, please use NLP_MODE = 4 only.
|
||||
# NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode
|
||||
# to determine how much Tolerance for first position
|
||||
# NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode
|
||||
|
|
@ -29,7 +37,7 @@ WIFI_WAIT_TIMEOUT_SELECT = 0
|
|||
# without EULA consent, but the uncertainty can be high.
|
||||
# QNP preferred mode prefers QNP when there is EULA consent,
|
||||
# otherwise OSNLP is used.
|
||||
NLP_MODE = 3
|
||||
NLP_MODE = 1
|
||||
NLP_MODE_EMERGENCY = 2
|
||||
NLP_TOLERANCE_TIME_FIRST = 5000
|
||||
NLP_TOLERANCE_TIME_AFTER = 20000
|
||||
|
|
@ -66,6 +74,18 @@ ZPP_TRIGGER_THRESHOLD=60000
|
|||
# 3: HIGH responsiveness
|
||||
GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0
|
||||
|
||||
#####################################
|
||||
#GTP Opt-In app
|
||||
#####################################
|
||||
|
||||
#GTP privacy policy version url
|
||||
#https support is required
|
||||
GTP_PRIVACY_VERSION_URL = https://info.izatcloud.net/privacy/version.html
|
||||
|
||||
#GTP privacy policy version download retry interval
|
||||
#unit is second. default is 86400
|
||||
GTP_PRIVACY_RETRY_INTERVAL = 86400
|
||||
|
||||
#####################################
|
||||
# IZAT PREMIUM FEATURE SETTINGS
|
||||
#####################################
|
||||
|
|
@ -82,12 +102,12 @@ GTP_CELL_PROC=MODEM
|
|||
#GTP_CELL valid modes:
|
||||
# DISABLED
|
||||
# BASIC
|
||||
GTP_CELL=BASIC
|
||||
GTP_CELL=DISABLED
|
||||
|
||||
#GTP_WIFI valid modes:
|
||||
# DISABLED
|
||||
# BASIC
|
||||
GTP_WIFI=BASIC
|
||||
GTP_WIFI=DISABLED
|
||||
|
||||
#GTP_WAA valid modes:
|
||||
# DISABLED
|
||||
|
|
@ -132,6 +152,9 @@ WIFI_SUPPLICANT_INFO=BASIC
|
|||
# ENABLED
|
||||
# DISABLED
|
||||
|
||||
#PROCESS_NAME
|
||||
# Name of the executable file.
|
||||
|
||||
#FEATURE MASKS:
|
||||
# GTP-WIFI 0X03
|
||||
# GTP-AP-CELL 0X0c
|
||||
|
|
@ -152,10 +175,10 @@ WIFI_SUPPLICANT_INFO=BASIC
|
|||
#1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2
|
||||
#2. 'all' or 'all exclude' -> for all basebands
|
||||
#3. 'all exclude XXXX' -> All basebands exclude XXXX. For example: all exclude sglte
|
||||
PROCESS_NAME=/system/bin/DR_AP_Service
|
||||
PROCESS_NAME=DR_AP_Service
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=DISABLED
|
||||
PROCESS_GROUPS=gps net_raw diag qcom_diag
|
||||
PROCESS_GROUPS=gps diag
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0
|
||||
PLATFORMS=all
|
||||
|
|
@ -166,10 +189,10 @@ HARDWARE_TYPE=automotive
|
|||
#Valyes for LEAN_TARGETS can be:
|
||||
#ENABLED -> if this process is supposed to run on lean and mean targets
|
||||
#DISABLED -> if this process is to be disabled on lean and mean targets
|
||||
PROCESS_NAME=/system/bin/garden_app
|
||||
PROCESS_ARGUMENT=-u 0 -q 0 -j 0 -g 0 -l 0 -Z 0 -T 1
|
||||
PROCESS_NAME=garden_app
|
||||
PROCESS_ARGUMENT=-l 0 -T 1
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=gps
|
||||
PROCESS_GROUPS=gps diag
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0
|
||||
PLATFORMS=all
|
||||
|
|
@ -177,7 +200,7 @@ BASEBAND=all
|
|||
LEAN_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=automotive
|
||||
|
||||
PROCESS_NAME=/system/bin/gpsone_daemon
|
||||
PROCESS_NAME=gpsone_daemon
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=inet
|
||||
|
|
@ -188,10 +211,10 @@ BASEBAND=svlte2a sglte sglte2
|
|||
LEAN_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
|
||||
PROCESS_NAME=/system/bin/lowi-server
|
||||
PROCESS_NAME=lowi-server
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=gps net_admin wifi inet qcom_diag
|
||||
PROCESS_GROUPS=gps net_admin wifi inet oem_2950
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0xf303
|
||||
PLATFORMS=all
|
||||
|
|
@ -199,35 +222,55 @@ BASEBAND=all
|
|||
LEAN_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
|
||||
PROCESS_NAME=/system/bin/xtwifi-inet-agent
|
||||
PROCESS_NAME=xtwifi-inet-agent
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=inet gps
|
||||
PREMIUM_FEATURE=1
|
||||
IZAT_FEATURE_MASK=0xc0f
|
||||
PLATFORMS=all
|
||||
BASEBAND=all
|
||||
LEAN_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
|
||||
PROCESS_NAME=/system/bin/xtwifi-client
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=wifi inet gps rfs_shared system
|
||||
PREMIUM_FEATURE=1
|
||||
IZAT_FEATURE_MASK=0xf0f
|
||||
PLATFORMS=all
|
||||
BASEBAND=all
|
||||
LEAN_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
|
||||
PROCESS_NAME=/system/vendor/bin/slim_daemon
|
||||
PROCESS_NAME=xtwifi-client
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=gps qcom_diag can
|
||||
PROCESS_GROUPS=wifi inet gps oem_2952 system wakelock
|
||||
PREMIUM_FEATURE=1
|
||||
IZAT_FEATURE_MASK=0xf0f
|
||||
PLATFORMS=all
|
||||
BASEBAND=all
|
||||
LEAN_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
|
||||
PROCESS_NAME=slim_daemon
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=gps oem_2950 can
|
||||
PREMIUM_FEATURE=1
|
||||
IZAT_FEATURE_MASK=0xf0
|
||||
PLATFORMS=all
|
||||
BASEBAND=all
|
||||
LEAN_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
|
||||
PROCESS_NAME=xtra-daemon
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=inet gps system
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0
|
||||
PLATFORMS=all
|
||||
BASEBAND=all
|
||||
LEAN_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
|
||||
##################################################
|
||||
# The name of process which launches XTRA client.
|
||||
# Default process name in software which launches
|
||||
# XTRA client is system-server. Uncomment the below
|
||||
# to set the desired process which will start the
|
||||
# XTRA client.
|
||||
##################################################
|
||||
# XC20_LAUNCH_PROCESS_NAME=garden_app
|
||||
|
|
|
|||
|
|
@ -16,36 +16,6 @@
|
|||
# X86 ONLY - UBUNTU:
|
||||
# Copy this file in the same directory where the executable is
|
||||
|
||||
# The RSSI threshold used in the RTT outlier detection in half decibels. Default value recommended by the
|
||||
# system team currently is -140 (corresponding to -70 dB).
|
||||
LOWI_RSSI_THRESHOLD_FOR_RTT = -140
|
||||
|
||||
# Number of measurment per AP for RTS/CTS
|
||||
LOWI_RTS_CTS_NUM_MEAS = 5
|
||||
|
||||
# Maximum Number of Outstanding Requests supported
|
||||
LOWI_MAX_OUTSTANDING_REQUEST = 255
|
||||
|
||||
# Maximum number of records in Cache
|
||||
LOWI_MAX_NUM_CACHE_RECORDS = 200
|
||||
|
||||
# Default threshold before issuing another fresh scan (ms)
|
||||
LOWI_FRESH_SCAN_THRESHOLD = 500
|
||||
|
||||
# Timeout in case no result is reported by the driver (seconds)
|
||||
LOWI_NO_RESULT_WAIT_TOLERANCE = 10
|
||||
|
||||
# Use Fake Wifi driver. Only valid for engineering builds
|
||||
LOWI_USE_FAKE_WIFI_DRIVER = 0
|
||||
|
||||
# Use ROME Wifi driver. Only valid for engineering builds
|
||||
# Will be removed later only for development support
|
||||
LOWI_USE_ROME_WIFI_DRIVER = 0
|
||||
|
||||
# Use LOWI LP.
|
||||
# When enabled the Discovery Request will be routed to LOWI-LP
|
||||
LOWI_USE_LOWI_LP = 1
|
||||
|
||||
# Log level
|
||||
# EL_LOG_OFF = 0, EL_ERROR = 1, EL_WARNING = 2, EL_INFO = 3, EL_DEBUG = 4, EL_VERBOSE = 5, EL_LOG_ALL = 100
|
||||
LOWI_LOG_LEVEL = 2
|
||||
|
|
|
|||
|
|
@ -52,6 +52,9 @@ SENSOR_ALGORITHM_CONFIG_MASK=0x1
|
|||
VN_ACCEL_CFG=1:128,0,12,0.0048828125,12,12,0.0048828125,24,12,0.0048828125
|
||||
VN_GYRO_CFG=1:129,0,16,0.00006103515625,16,16,0.00006103515625,32,16,0.00006103515625
|
||||
VN_ODOMETRY_CFG=1:130,0,1,5,6,32
|
||||
VN_SPEED_CFG=1:131,5,8,1,2,3,1,1,9,2,14,2
|
||||
VN_DWS_CFG=1:132,5,8,1,2,3,1,1,5,2,7,2,9,2,11,2,13,2,15,2,17,2,19,2
|
||||
VN_GEAR_CFG=1:422,20,4,0,4,1,9,0,1,2,3,4,5,6,7,8
|
||||
|
||||
#Procesors clock ratio: AP and CAN bus microcontroller
|
||||
VN_PROC_CLOCK_RATIO=1.93165618815148
|
||||
|
|
@ -64,4 +67,3 @@ VN_PROC_CLOCK_RATIO=1.93165618815148
|
|||
# 3 - CLOCK_REALTIME
|
||||
# 4 - CLOCK_BOOTTIME using Alarm timer interface
|
||||
NDK_PROVIDER_TIME_SOURCE=1
|
||||
|
||||
|
|
|
|||
|
|
@ -6,6 +6,52 @@
|
|||
#Copyright (c) 2012-2014 Qualcomm Atheros, Inc.
|
||||
#All Rights Reserved.
|
||||
#Qualcomm Atheros Confidential and Proprietary.
|
||||
#
|
||||
#Copyright (c) 2017 Qualcomm Technologies, Inc.
|
||||
#All Rights Reserved.
|
||||
#Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
##############################################################################
|
||||
# non-IOT devices configuration items #
|
||||
# For non-IOT devices, configure below configuration items #
|
||||
# according to the app note: 80-NK218-1 and remove the configuration items #
|
||||
# in section of "IOT devices configuration items". #
|
||||
##############################################################################
|
||||
|
||||
# ASN URI v2 to be used by some GTP AP modules that
|
||||
# need to run with ASN URI v2 protocol.
|
||||
XT_SERVER_ROOT_URL = https://gtp1.izatcloud.net:443/uds/v2
|
||||
|
||||
# ASN URI v3 to be used by GTP AP modules that
|
||||
# can support ASN URI v3 protocol.
|
||||
XT_SERVER_ROOT_URL_V3 = https://gtp1.izatcloud.net:443/uds/v3
|
||||
|
||||
# size, in bytes, of the cache on device
|
||||
SIZE_BYTE_TOTAL_CACHE = 5000000
|
||||
|
||||
##############################################################################
|
||||
# IOT devices configuration items #
|
||||
# For IOT devices, configure below configuration items #
|
||||
# according to the app note and remove the configuration items in section of #
|
||||
# "non-IOT devices configuration items". #
|
||||
##############################################################################
|
||||
|
||||
# ASN URI v3 to be used by GTP AP modules that
|
||||
# can support ASN URI v3 protocol.
|
||||
# XT_SERVER_ROOT_URL_V3 = https://gtpma1.izatcloud.net:443/uds/v3
|
||||
|
||||
# 1: default mode, where mobile downloads tiles and partitions
|
||||
# 2: mode for memory and bandwidth limited devices, where mobile
|
||||
# downloads AP list and cell list
|
||||
# GTP_AP_MODE = 2
|
||||
|
||||
# 1: MP cell features relies on GTP AP for either download or upload
|
||||
# 0: MP cell features does not rely on GTP AP
|
||||
# GTP_AP_NEEDED_BY_MP_CELL = 1
|
||||
|
||||
##############################################################################
|
||||
# Configuration items applicable to all devices #
|
||||
##############################################################################
|
||||
|
||||
# Log verbosity control for most of the GTP WiFi system, including native and
|
||||
# Java componenets
|
||||
|
|
@ -20,63 +66,10 @@ OEM_ID_IN_REQUEST_TO_SERVER = "Qualcomm"
|
|||
# default "UNKNOWN"
|
||||
MODEL_ID_IN_REQUEST_TO_SERVER = "UNKNOWN"
|
||||
|
||||
##############################################################################
|
||||
# GTP-WiFi positioning config #
|
||||
##############################################################################
|
||||
|
||||
# URL for the server position request
|
||||
XT_SERVER_ROOT_URL = https://gtpa1.izatcloud.net:443/uds/v2
|
||||
|
||||
# size, in bytes, of the cache on device
|
||||
SIZE_BYTE_TOTAL_CACHE = 5000000
|
||||
|
||||
# value 0: (default) use the async LOWI wifi scanner
|
||||
# value 10: FAKE AP wifi scanner
|
||||
WIFI_SCANNER_CHOICE = 0
|
||||
|
||||
##############################################################################
|
||||
# XT-WiFi crowd sourcing config #
|
||||
##############################################################################
|
||||
# Use server suggestion for crowd sourcing configuration
|
||||
ENABLE_SERVER_SUGGESTION_FOR_CROWD_SOURCING = 1
|
||||
|
||||
# Maximum number of APs to be collected for upload
|
||||
NUM_MAX_AP_PER_UPLOAD = 16383
|
||||
# Number of minutes between upload: 24 hours
|
||||
INTERVAL_MIN_UPLOAD = 1440
|
||||
# Number of minutes between forced upload: 5 days
|
||||
INTERVAL_MIN_FORCED_UPLOAD = 7200
|
||||
|
||||
# The minimum time between two collected AP data sets in seconds
|
||||
INTERVAL_SEC_AP_SETS_COLLECT = 10
|
||||
# Timeout for scan interval when phone is on: 600 seconds (10 minute)
|
||||
INTERVAL_SEC_SCAN = 600
|
||||
# Timeout for scan interval when phone has not continusouly on for INTERVAL_MIN_SCAN
|
||||
INTERVAL_MIN_FORCED_SCAN = 480
|
||||
|
||||
# Maximum number of Cell DB records for upload
|
||||
WWAN_MAX_CELLDB_RECORDS_PER_UPLOAD = 1000
|
||||
|
||||
##############################################################################
|
||||
# GTP AP cell config #
|
||||
##############################################################################
|
||||
# This item specifies the RIL server name.
|
||||
# This configure item can not be removed in Android target.
|
||||
XTRAT_WWAN_LITE_LOC_RIL_SERVER_NAME = "OS-Agent"
|
||||
|
||||
# Maximum total number of SNA records cached in mobile storage.
|
||||
# Max allowed value is 10000
|
||||
# Min value is 100
|
||||
XTRAT_WWAN_LITE_MAX_DL_SNA = 10000
|
||||
|
||||
# Maximum total number of BSA records cached in mobile storage.
|
||||
# Max allowed value is 65000
|
||||
# Min value is 100
|
||||
XTRAT_WWAN_LITE_MAX_DL_BSA = 65000
|
||||
|
||||
##############################################################################
|
||||
# Qualcomm Network Location Provider config #
|
||||
##############################################################################
|
||||
|
||||
# Accuracy Threshold for NLP position. Position exceeds thsi threshold will be filtered out.
|
||||
# Default is 25000 meters.
|
||||
LARGE_ACCURACY_THRESHOLD_TO_FILTER_NLP_POSITION = 25000
|
||||
|
|
|
|||
|
|
@ -1,20 +1,18 @@
|
|||
# GPS
|
||||
PRODUCT_PACKAGES += \
|
||||
android.hardware.gnss@1.0-impl \
|
||||
gps.msm8937 \
|
||||
android.hardware.gnss@1.0-impl-qti \
|
||||
libcurl \
|
||||
libgnss \
|
||||
libgnsspps
|
||||
|
||||
PRODUCT_BOOT_JARS += \
|
||||
com.qti.location.sdk
|
||||
|
||||
PRODUCT_COPY_FILES += \
|
||||
$(VENDOR_PATH)/gps/etc/flp.conf:system/etc/flp.conf \
|
||||
$(VENDOR_PATH)/gps/etc/gps.conf:system/etc/gps.conf \
|
||||
$(VENDOR_PATH)/gps/etc/izat.conf:system/etc/izat.conf \
|
||||
$(VENDOR_PATH)/gps/etc/lowi.conf:system/etc/lowi.conf \
|
||||
$(VENDOR_PATH)/gps/etc/sap.conf:system/etc/sap.conf \
|
||||
$(VENDOR_PATH)/gps/etc/xtwifi.conf:system/etc/xtwifi.conf
|
||||
$(VENDOR_PATH)/gps/etc/apdr.conf:$(TARGET_COPY_OUT_VENDOR)/etc/apdr.conf \
|
||||
$(VENDOR_PATH)/gps/etc/flp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/flp.conf \
|
||||
$(VENDOR_PATH)/gps/etc/gps.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gps.conf \
|
||||
$(VENDOR_PATH)/gps/etc/izat.conf:$(TARGET_COPY_OUT_VENDOR)/etc/izat.conf \
|
||||
$(VENDOR_PATH)/gps/etc/lowi.conf:$(TARGET_COPY_OUT_VENDOR)/etc/lowi.conf \
|
||||
$(VENDOR_PATH)/gps/etc/sap.conf:$(TARGET_COPY_OUT_VENDOR)/etc/sap.conf \
|
||||
$(VENDOR_PATH)/gps/etc/xtwifi.conf:$(TARGET_COPY_OUT_VENDOR)/etc/xtwifi.conf
|
||||
|
||||
# Permissions
|
||||
PRODUCT_COPY_FILES += \
|
||||
|
|
|
|||
|
|
@ -151,50 +151,48 @@ vendor/lib64/libtzdrmgenprov.so
|
|||
vendor/lib/hw/gatekeeper.msm8937.so
|
||||
vendor/lib64/hw/gatekeeper.msm8937.so
|
||||
|
||||
# GPS - from garlic (YUREKA BLACK)
|
||||
-framework/com.qti.location.sdk.jar
|
||||
-framework/com.qualcomm.location.vzw_library.jar
|
||||
-framework/izat.xt.srv.jar
|
||||
-lib64/libloc_api_v02.so
|
||||
-lib64/libloc_ds_api.so
|
||||
-priv-app/com.qualcomm.location/com.qualcomm.location.apk
|
||||
bin/loc_launcher:vendor/bin/loc_launcher
|
||||
bin/lowi-server:vendor/bin/lowi-server
|
||||
bin/xtwifi-client:vendor/bin/xtwifi-client
|
||||
bin/xtwifi-inet-agent:vendor/bin/xtwifi-inet-agent
|
||||
etc/permissions/com.qti.location.sdk.xml
|
||||
etc/permissions/com.qualcomm.location.vzw_library.xml
|
||||
etc/permissions/com.qualcomm.location.xml
|
||||
etc/permissions/izat.xt.srv.xml
|
||||
etc/xtra_root_cert.pem
|
||||
vendor/bin/slim_daemon
|
||||
vendor/lib64/hw/flp.default.so
|
||||
vendor/lib64/libalarmservice_jni.so
|
||||
vendor/lib64/libasn1cper.so
|
||||
vendor/lib64/libasn1crt.so
|
||||
vendor/lib64/libasn1crtx.so
|
||||
vendor/lib64/libdataitems.so
|
||||
vendor/lib64/libDRPlugin.so
|
||||
vendor/lib64/libdrplugin_client.so
|
||||
vendor/lib64/libevent_observer.so
|
||||
vendor/lib64/libflp.so
|
||||
vendor/lib64/libgdtap.so
|
||||
vendor/lib64/libgeofence.so
|
||||
vendor/lib64/libizat_client_api.so
|
||||
vendor/lib64/libizat_core.so
|
||||
vendor/lib64/liblbs_core.so
|
||||
vendor/lib64/libloc_ext.so
|
||||
vendor/lib64/libloc_externalDr.so
|
||||
vendor/lib64/liblocationservice.so
|
||||
vendor/lib64/liblocationservice_glue.so
|
||||
vendor/lib64/liblowi_client.so
|
||||
vendor/lib64/liblowi_wifihal.so
|
||||
vendor/lib64/liblowi_wifihal_nl.so
|
||||
vendor/lib64/libslimclient.so
|
||||
vendor/lib64/libulp2.so
|
||||
vendor/lib64/libxt_native.so
|
||||
vendor/lib64/libxtadapter.so
|
||||
vendor/lib64/libxtwifi_ulp_adaptor.so
|
||||
# GPS - from bardock-pro - OPM1.171019.011
|
||||
etc/permissions/com.qti.location.sdk.xml|cb68a566bd77dcc75bb7547199d528289fac01cb
|
||||
etc/permissions/com.qualcomm.location.xml|e837966b6a1a63430ac7ff648e84b0312cd3a46b
|
||||
etc/permissions/izat.xt.srv.xml|a0f460056f27b5495a4d6e959eecf0e429c42a57
|
||||
framework/com.qti.location.sdk.jar|f2e9f1d49201e1bad83008445fdafe9541e9b2bd
|
||||
framework/izat.xt.srv.jar|e10f1baf6ae0f70c4a529e5711559cebbc3644c9
|
||||
lib64/liblocationservice_jni.so|84fddd9ace2be661d26cad1864281c386b709cb2
|
||||
lib64/libxt_native.so|900aa51d3d2f731b906a321e25c259fbab656f1c
|
||||
lib64/vendor.qti.gnss@1.0.so|716a812a9f4cdb45c57eb0a6fabb17624a91d553
|
||||
-priv-app/com.qualcomm.location/com.qualcomm.location.apk|397314f080f553489440c63da44d01f482e6b761
|
||||
vendor/bin/hw/vendor.qti.gnss@1.0-service|bdf23fe2af07c2afb74721023431446104fd828d
|
||||
vendor/bin/loc_launcher|0675f4524d2c9e94f7e978b5e00734c0835ddf15
|
||||
vendor/bin/lowi-server|4aa6f305f31ff36fdddc7e3beeb29cf0bf1a9d54
|
||||
vendor/bin/slim_daemon|ac7b90dcc27ef1d1fdd6a1c98bc495f90d19ecf4
|
||||
vendor/bin/xtra-daemon|8dac3ae4b8d1be18b40763861f9440b6278ff902
|
||||
vendor/etc/cacert_location.pem|0789bf799c7e45d352a83e2f79ddb0cea86db85b
|
||||
vendor/etc/init/vendor.qti.gnss@1.0-service.rc|98655e2adc2158a052b0ecf06b065535f0a2aac7
|
||||
vendor/etc/xtra_root_cert.pem|f55a31ec4d9cf8ce2724acadecf00c779f8767db
|
||||
vendor/lib64/hw/vendor.qti.gnss@1.0-impl.so|3a66e268286ebfad3f1e35f54b041d6b3d2ed191
|
||||
vendor/lib64/libalarmservice_jni.so|2791b868e4f145e05d3405b99e40692e87d0a3c6
|
||||
vendor/lib64/libdataitems.so|e175d6254907cde80b1352da2874d88c3607d77f
|
||||
vendor/lib64/libdrplugin_client.so|bcd1266f5775888824a925c65020cac65b4124df
|
||||
vendor/lib64/libDRPlugin.so|21256ab36eb1ae0a9b32eee03a6af162d1920fc8
|
||||
vendor/lib64/libevent_observer.so|c163884372303f68e1fc073cf42d30959ef771c6
|
||||
vendor/lib64/libflp.so|22f9cfcbd1c89db91b3e9cece2f670c282eacc1b
|
||||
vendor/lib64/libgdtap.so|efc9752ac1f829bd28d4575370c3bf649fb9c691
|
||||
vendor/lib64/libgeofence.so|a92df9ea383d7bad2d0283c9d160d6b26f30fdbb
|
||||
vendor/lib64/libizat_client_api.so|896931c51c7fa8a9f626c971361679823e635d77
|
||||
vendor/lib64/libizat_core.so|8857e6b3b0fa04900285fad5101b4157f62f33a7
|
||||
vendor/lib64/liblbs_core.so|3f55ad81c6eaa76c9a8cdc436808692e3d12fe44
|
||||
-vendor/lib64/libloc_api_v02.so|548d3280b4b340803cc7cdbd794dfcffd65012bf
|
||||
vendor/lib64/libloc_ds_api.so|88bd00eef7b3e052e2725ce8883a8da0d95028f0
|
||||
vendor/lib64/libloc_externalDr.so|9165f1621d9d34034c4921c96bf45849429f32fd
|
||||
vendor/lib64/liblocationservice_glue.so|9f56f0e9089f0eadc29036c2cffd5a06852f4cb0
|
||||
vendor/lib64/liblocationservice.so|13eae193a44f991daf2c54eb2311901bd32a6d8b
|
||||
vendor/lib64/liblowi_client.so|b6a6e3315ff02115fba6a3c7c023ef94530cf272
|
||||
vendor/lib64/liblowi_wifihal.so|831095ee8091008db81af836cafc8a90b210d4bc
|
||||
vendor/lib64/libquipc_os_api.so|12ffd3e3a2d566d68c1ee45b0879597822df7971
|
||||
vendor/lib64/libulp2.so|1a92023fbe40d5042239f3efbdcd82f3299e8b17
|
||||
vendor/lib64/libxtadapter.so|7705b2c895dfc91f459f9e69860bc312c16b4216
|
||||
vendor/lib64/libxtwifi_ulp_adaptor.so|d2e768c4d5f44a101b12ef668f8b7393a42541ce
|
||||
vendor/lib64/vendor.qti.gnss@1.0_vendor.so|249c76153f8de014bf2dd2ab623ee3d87741fbc8
|
||||
|
||||
# Graphics - from vince 8.1.0 OPM1.171019.019
|
||||
vendor/lib/egl/eglSubDriverAndroid.so
|
||||
|
|
|
|||
|
|
@ -403,7 +403,7 @@ service wpa_supplicant /vendor/bin/hw/wpa_supplicant \
|
|||
service loc_launcher /vendor/bin/loc_launcher
|
||||
#loc_launcher will start as root and set its uid to gps
|
||||
class late_start
|
||||
group gps inet net_raw qcom_diag net_admin wifi
|
||||
group gps inet diag wifi
|
||||
writepid /dev/cpuset/system-background/tasks
|
||||
|
||||
service qcom-sh /system/bin/sh /init.qcom.sh
|
||||
|
|
|
|||
Loading…
Reference in a new issue