msm8937-common: Update GPS stack to O-MR1

* From bardock-pro - OPM1.171019.011
This commit is contained in:
Bruno Martins 2018-01-08 00:06:46 +00:00 committed by Isaac Chen
parent b3d607b848
commit e3a264221a
11 changed files with 295 additions and 190 deletions

View file

@ -1,3 +1,3 @@
# GPS
BOARD_VENDOR_QCOM_GPS_LOC_API_HARDWARE := true
USE_DEVICE_SPECIFIC_GPS := true
TARGET_NO_RPC := true

44
gps/etc/apdr.conf Normal file
View file

@ -0,0 +1,44 @@
# AP DR SENSOR Configuration file
#
# SENSOR_SERVICE options are one of below
# accel,gyro,vehicle_accel,vehicle_gyro,pedometer,vehicle_odometry,accel_temp,
# gyro_temp,baro,mag_calib,mag_uncalib,amd,rmd.
#
# SENSOR_PROVIDER options is one of -- default,native,ssc,samlite.
#
# SENSOR_RATE = 1~100 (Hz)
#
# SENSOR_SAMPLES = 1~N
#
# SENSOR_STATISTIC_ENABLED
# bit 0: Diag Print Enabled
# bit 1: Adb Print Enabled
# SENSOR_STATISTIC_PRINT_COUNT
# Skip Number of Print
#
SENSOR_SERVICE = accel
SENSOR_PROVIDER = native
SENSOR_RATE = 100
SENSOR_SAMPLES = 1
SENSOR_STATISTIC_ENABLED = 3
SENSOR_STATISTIC_PRINT_COUNT = 50
SENSOR_SERVICE = vehicle_accel
SENSOR_PROVIDER = native
SENSOR_RATE = 10
SENSOR_SAMPLES = 1
SENSOR_STATISTIC_ENABLED = 3
SENSOR_STATISTIC_PRINT_COUNT = 50
SENSOR_SERVICE = gyro
SENSOR_PROVIDER = native
SENSOR_RATE = 100
SENSOR_SAMPLES = 1
SENSOR_STATISTIC_ENABLED = 3
SENSOR_STATISTIC_PRINT_COUNT = 50
GNSS_POS_STATISTIC_ENABLED = 3
GNSS_POS_STATISTIC_PRNTCNT = 10
GNSS_MSR_STATISTIC_ENABLED = 3
GNSS_MSR_STATISTIC_PRNTCNT = 10

View file

@ -14,6 +14,16 @@
# batch size defined as 20 as below.
BATCH_SIZE=20
# The number of batched locations
# requested to modem for outdoor
# trip batching. The desired number
# defined below may not be satisfied, as
# the modem can only return the number
# of batched locations that can be allocated,
# which is limited by memory. The default
# trip batch size defined as 600 as below.
OUTDOOR_TRIP_BATCH_SIZE=600
###################################
# FLP BATCHING SESSION TIMEOUT
###################################
@ -58,3 +68,24 @@ ACCURACY=1
# 2: MEDIUM responsiveness
# 3: HIGH responsiveness
FLP_GEOFENCE_RESPONSIVENESS_OVERRIDE = 0
####################################
# By default APPS must support LB only if modem support
# LB 1.5 and above. This parameter adds an exception
# for targets where modem only supports LB 1.0.
# This might be useful for primarily outdoor devices.
# 0: MUST NOT ALLOW LB IF MODEM ONLY SUPPORTS
# LB 1.0
# 1: ALLOW LB IF MODEM ONLY SUPPORTS LB 1.0
####################################
ALLOW_LB_1_0 = 0
####################################
# By default if network fixes are not sensor assisted
# these fixes must be dropped. This parameter adds an exception
# for targets where there is no PDR and we still want to
# report out network fixes
# 0: MUST NOT ALLOW NETWORK FIXES
# 1: ALLOW NETWORK FIXES
####################################
ALLOW_NETWORK_FIXES = 0

View file

@ -1,4 +1,5 @@
#URLs from which to download XTRA data
#Uncommenting these urls would only enable
#the power up auto injection and force injection(test case).
XTRA_SERVER_1=https://xtrapath1.izatcloud.net/xtra3grc.bin
XTRA_SERVER_2=https://xtrapath2.izatcloud.net/xtra3grc.bin
XTRA_SERVER_3=https://xtrapath3.izatcloud.net/xtra3grc.bin
@ -8,7 +9,7 @@ XTRA_SERVER_3=https://xtrapath3.izatcloud.net/xtra3grc.bin
#AUTO = 1
#XTRA2 = 2
#XTRA3 = 3
XTRA_VERSION_CHECK=1
XTRA_VERSION_CHECK=0
# Error Estimate
# _SET = 1
@ -24,7 +25,7 @@ XTRA_CA_PATH=/system/etc/security/cacerts
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
# If DEBUG_LEVEL is commented, Android's logging levels will be used
DEBUG_LEVEL = 3
DEBUG_LEVEL = 2
# Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=0
@ -34,25 +35,25 @@ INTERMEDIATE_POS=0
# Set bit 0x1 if MO GPS functionalities are to be locked
# Set bit 0x2 if NI GPS functionalities are to be locked
# default - non is locked for backward compatibility
#GPS_LOCK = 0
GPS_LOCK = 3
# supl version 1.0
SUPL_VER=0x10000
# supl version 2.0
SUPL_VER=0x20000
# Emergency SUPL, 1=enable, 0=disable
SUPL_ES=0
#SUPL_ES=0
#Choose PDN for Emergency SUPL
#1 - Use emergency PDN
#0 - Use regular SUPL PDN for Emergency SUPL
USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
#USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
#SUPL_MODE is a bit mask set in config.xml per carrier by default.
#If it is uncommented here, this value will overwrite the value from
#config.xml.
#MSA=0X2
#MSB=0X1
#SUPL_MODE=
SUPL_MODE=1
# GPS Capabilities bit mask
# SCHEDULING = 0x01
@ -72,8 +73,8 @@ CAPABILITIES=0x37
################################
# FOR SUPL SUPPORT, set the following
# SUPL_HOST=supl.host.com or IP
# SUPL_PORT=1234
SUPL_HOST=supl.google.com
SUPL_PORT=7275
# FOR C2K PDE SUPPORT, set the following
# C2K_HOST=c2k.pde.com or IP
@ -117,6 +118,8 @@ A_GLONASS_POS_PROTOCOL_SELECT = 0
##################################################
# 0x1: DBH for LPPe CP
# 0x2: WLAN AP Measurements for LPPe CP
# 0x4: SRN AP measurement for CP
# 0x8: Sensor Barometer Measurement LPPe CP
LPPE_CP_TECHNOLOGY = 0
##################################################
@ -124,6 +127,8 @@ LPPE_CP_TECHNOLOGY = 0
##################################################
# 0x1: DBH for LPPe UP
# 0x2: WLAN AP Measurements for LPPe UP
# 0x4: SRN AP measurement for UP
# 0x8: Sensor Barometer Measurement LPPe UP
LPPE_UP_TECHNOLOGY = 0
##################################################
@ -140,43 +145,64 @@ LPPE_UP_TECHNOLOGY = 0
# 0: disable
# 1: enable
AGPS_CONFIG_INJECT = 1
##################################################
# GNSS settings for automotive use cases
# Configurations in following section are
# specific to automotive use cases, others
# please do not change, keep the default values
##################################################
##################################################
# AP Coarse Timestamp Uncertainty
##################################################
# default : 10
# or as per clock uncertainty of product
# AP time stamp uncertainty, until GNSS receiver
# is able to acquire better timing information
AP_TIMESTAMP_UNCERTAINTY = 10
#####################################
# GNSS PPS settings
#####################################
#AP DR engine availability status
# 0 : NO AP DR (default)
# 1 : AP DR enabled
##################################################
# QDR engine availability status
##################################################
# 0 : NO QDR (default)
# 1 : QDR enabled
# This settings enables QDR Configuration for
# automotive use case, if enabled then
# DR_AP_Service needs to be enabled in izat.con
#EXTERNAL_DR_ENABLED = 0
#####################################
#DR_SYNC Pulse Availability
# DR_SYNC Pulse Availability
#####################################
# 0 : DR_SYNC pulse not available (default)
# 1 : DR_SYNC pulse available
# This configuration enables the driver to make use
# of PPS events generated by DR_SYNC pulse
# Standard Linux PPS driver needs to be enabled
DR_SYNC_ENABLED = 0
#####################################
#PPS Device name
# PPS Device name
#####################################
PPS_DEVICENAME = /dev/pps0
#####################################
#AP Clock Accuracy
# AP Clock Accuracy
#####################################
# Quality of APPS processor clock (in PPM).
# Value specified is used for calculation of
# APPS time stamp uncertainty
AP_CLOCK_PPM = 100
#####################################
#MAX ms difference to detect missing pulse
# MAX ms difference to detect missing pulse
#####################################
# Specifies time threshold in ms to validate any missing PPS pulses
MISSING_PULSE_TIME_DELTA = 900
#####################################
#Propagation time uncertainty
# Propagation time uncertainty
#####################################
# This settings enables time uncertainty propagation
# logic incase of missing PPS pulse
PROPAGATION_TIME_UNCERTAINTY = 1

View file

@ -9,10 +9,18 @@ IZAT_DEBUG_LEVEL = 2
##################################################
WIFI_WAIT_TIMEOUT_SELECT = 0
##################################################
# Time interval of injecting SRN scan data to modem
# time in seconds.
# Note: recommended value is between 1-5 sec
##################################################
LPPE_SRN_DATA_SCAN_INJECT_TIME=2
################################
# NLP Settings
################################
# NLP_MODE 1: OSNLP Only, 2: QNP Only, 3: Combo, 4: QNP preferred
# For Automotive products, please use NLP_MODE = 4 only.
# NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode
# to determine how much Tolerance for first position
# NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode
@ -29,7 +37,7 @@ WIFI_WAIT_TIMEOUT_SELECT = 0
# without EULA consent, but the uncertainty can be high.
# QNP preferred mode prefers QNP when there is EULA consent,
# otherwise OSNLP is used.
NLP_MODE = 3
NLP_MODE = 1
NLP_MODE_EMERGENCY = 2
NLP_TOLERANCE_TIME_FIRST = 5000
NLP_TOLERANCE_TIME_AFTER = 20000
@ -66,6 +74,18 @@ ZPP_TRIGGER_THRESHOLD=60000
# 3: HIGH responsiveness
GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0
#####################################
#GTP Opt-In app
#####################################
#GTP privacy policy version url
#https support is required
GTP_PRIVACY_VERSION_URL = https://info.izatcloud.net/privacy/version.html
#GTP privacy policy version download retry interval
#unit is second. default is 86400
GTP_PRIVACY_RETRY_INTERVAL = 86400
#####################################
# IZAT PREMIUM FEATURE SETTINGS
#####################################
@ -82,12 +102,12 @@ GTP_CELL_PROC=MODEM
#GTP_CELL valid modes:
# DISABLED
# BASIC
GTP_CELL=BASIC
GTP_CELL=DISABLED
#GTP_WIFI valid modes:
# DISABLED
# BASIC
GTP_WIFI=BASIC
GTP_WIFI=DISABLED
#GTP_WAA valid modes:
# DISABLED
@ -132,6 +152,9 @@ WIFI_SUPPLICANT_INFO=BASIC
# ENABLED
# DISABLED
#PROCESS_NAME
# Name of the executable file.
#FEATURE MASKS:
# GTP-WIFI 0X03
# GTP-AP-CELL 0X0c
@ -152,10 +175,10 @@ WIFI_SUPPLICANT_INFO=BASIC
#1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2
#2. 'all' or 'all exclude' -> for all basebands
#3. 'all exclude XXXX' -> All basebands exclude XXXX. For example: all exclude sglte
PROCESS_NAME=/system/bin/DR_AP_Service
PROCESS_NAME=DR_AP_Service
PROCESS_ARGUMENT=
PROCESS_STATE=DISABLED
PROCESS_GROUPS=gps net_raw diag qcom_diag
PROCESS_GROUPS=gps diag
PREMIUM_FEATURE=0
IZAT_FEATURE_MASK=0
PLATFORMS=all
@ -166,10 +189,10 @@ HARDWARE_TYPE=automotive
#Valyes for LEAN_TARGETS can be:
#ENABLED -> if this process is supposed to run on lean and mean targets
#DISABLED -> if this process is to be disabled on lean and mean targets
PROCESS_NAME=/system/bin/garden_app
PROCESS_ARGUMENT=-u 0 -q 0 -j 0 -g 0 -l 0 -Z 0 -T 1
PROCESS_NAME=garden_app
PROCESS_ARGUMENT=-l 0 -T 1
PROCESS_STATE=ENABLED
PROCESS_GROUPS=gps
PROCESS_GROUPS=gps diag
PREMIUM_FEATURE=0
IZAT_FEATURE_MASK=0
PLATFORMS=all
@ -177,7 +200,7 @@ BASEBAND=all
LEAN_TARGETS=DISABLED
HARDWARE_TYPE=automotive
PROCESS_NAME=/system/bin/gpsone_daemon
PROCESS_NAME=gpsone_daemon
PROCESS_ARGUMENT=
PROCESS_STATE=ENABLED
PROCESS_GROUPS=inet
@ -188,10 +211,10 @@ BASEBAND=svlte2a sglte sglte2
LEAN_TARGETS=DISABLED
HARDWARE_TYPE=all
PROCESS_NAME=/system/bin/lowi-server
PROCESS_NAME=lowi-server
PROCESS_ARGUMENT=
PROCESS_STATE=ENABLED
PROCESS_GROUPS=gps net_admin wifi inet qcom_diag
PROCESS_GROUPS=gps net_admin wifi inet oem_2950
PREMIUM_FEATURE=0
IZAT_FEATURE_MASK=0xf303
PLATFORMS=all
@ -199,35 +222,55 @@ BASEBAND=all
LEAN_TARGETS=DISABLED
HARDWARE_TYPE=all
PROCESS_NAME=/system/bin/xtwifi-inet-agent
PROCESS_NAME=xtwifi-inet-agent
PROCESS_ARGUMENT=
PROCESS_STATE=ENABLED
PROCESS_GROUPS=inet gps
PREMIUM_FEATURE=1
IZAT_FEATURE_MASK=0xc0f
PLATFORMS=all
BASEBAND=all
LEAN_TARGETS=DISABLED
HARDWARE_TYPE=all
PROCESS_NAME=/system/bin/xtwifi-client
PROCESS_ARGUMENT=
PROCESS_STATE=ENABLED
PROCESS_GROUPS=wifi inet gps rfs_shared system
PREMIUM_FEATURE=1
IZAT_FEATURE_MASK=0xf0f
PLATFORMS=all
BASEBAND=all
LEAN_TARGETS=DISABLED
HARDWARE_TYPE=all
PROCESS_NAME=/system/vendor/bin/slim_daemon
PROCESS_NAME=xtwifi-client
PROCESS_ARGUMENT=
PROCESS_STATE=ENABLED
PROCESS_GROUPS=gps qcom_diag can
PROCESS_GROUPS=wifi inet gps oem_2952 system wakelock
PREMIUM_FEATURE=1
IZAT_FEATURE_MASK=0xf0f
PLATFORMS=all
BASEBAND=all
LEAN_TARGETS=DISABLED
HARDWARE_TYPE=all
PROCESS_NAME=slim_daemon
PROCESS_ARGUMENT=
PROCESS_STATE=ENABLED
PROCESS_GROUPS=gps oem_2950 can
PREMIUM_FEATURE=1
IZAT_FEATURE_MASK=0xf0
PLATFORMS=all
BASEBAND=all
LEAN_TARGETS=DISABLED
HARDWARE_TYPE=all
PROCESS_NAME=xtra-daemon
PROCESS_ARGUMENT=
PROCESS_STATE=ENABLED
PROCESS_GROUPS=inet gps system
PREMIUM_FEATURE=0
IZAT_FEATURE_MASK=0
PLATFORMS=all
BASEBAND=all
LEAN_TARGETS=DISABLED
HARDWARE_TYPE=all
##################################################
# The name of process which launches XTRA client.
# Default process name in software which launches
# XTRA client is system-server. Uncomment the below
# to set the desired process which will start the
# XTRA client.
##################################################
# XC20_LAUNCH_PROCESS_NAME=garden_app

View file

@ -16,36 +16,6 @@
# X86 ONLY - UBUNTU:
# Copy this file in the same directory where the executable is
# The RSSI threshold used in the RTT outlier detection in half decibels. Default value recommended by the
# system team currently is -140 (corresponding to -70 dB).
LOWI_RSSI_THRESHOLD_FOR_RTT = -140
# Number of measurment per AP for RTS/CTS
LOWI_RTS_CTS_NUM_MEAS = 5
# Maximum Number of Outstanding Requests supported
LOWI_MAX_OUTSTANDING_REQUEST = 255
# Maximum number of records in Cache
LOWI_MAX_NUM_CACHE_RECORDS = 200
# Default threshold before issuing another fresh scan (ms)
LOWI_FRESH_SCAN_THRESHOLD = 500
# Timeout in case no result is reported by the driver (seconds)
LOWI_NO_RESULT_WAIT_TOLERANCE = 10
# Use Fake Wifi driver. Only valid for engineering builds
LOWI_USE_FAKE_WIFI_DRIVER = 0
# Use ROME Wifi driver. Only valid for engineering builds
# Will be removed later only for development support
LOWI_USE_ROME_WIFI_DRIVER = 0
# Use LOWI LP.
# When enabled the Discovery Request will be routed to LOWI-LP
LOWI_USE_LOWI_LP = 1
# Log level
# EL_LOG_OFF = 0, EL_ERROR = 1, EL_WARNING = 2, EL_INFO = 3, EL_DEBUG = 4, EL_VERBOSE = 5, EL_LOG_ALL = 100
LOWI_LOG_LEVEL = 2

View file

@ -52,6 +52,9 @@ SENSOR_ALGORITHM_CONFIG_MASK=0x1
VN_ACCEL_CFG=1:128,0,12,0.0048828125,12,12,0.0048828125,24,12,0.0048828125
VN_GYRO_CFG=1:129,0,16,0.00006103515625,16,16,0.00006103515625,32,16,0.00006103515625
VN_ODOMETRY_CFG=1:130,0,1,5,6,32
VN_SPEED_CFG=1:131,5,8,1,2,3,1,1,9,2,14,2
VN_DWS_CFG=1:132,5,8,1,2,3,1,1,5,2,7,2,9,2,11,2,13,2,15,2,17,2,19,2
VN_GEAR_CFG=1:422,20,4,0,4,1,9,0,1,2,3,4,5,6,7,8
#Procesors clock ratio: AP and CAN bus microcontroller
VN_PROC_CLOCK_RATIO=1.93165618815148
@ -64,4 +67,3 @@ VN_PROC_CLOCK_RATIO=1.93165618815148
# 3 - CLOCK_REALTIME
# 4 - CLOCK_BOOTTIME using Alarm timer interface
NDK_PROVIDER_TIME_SOURCE=1

View file

@ -6,6 +6,52 @@
#Copyright (c) 2012-2014 Qualcomm Atheros, Inc.
#All Rights Reserved.
#Qualcomm Atheros Confidential and Proprietary.
#
#Copyright (c) 2017 Qualcomm Technologies, Inc.
#All Rights Reserved.
#Confidential and Proprietary - Qualcomm Technologies, Inc.
##############################################################################
# non-IOT devices configuration items #
# For non-IOT devices, configure below configuration items #
# according to the app note: 80-NK218-1 and remove the configuration items #
# in section of "IOT devices configuration items". #
##############################################################################
# ASN URI v2 to be used by some GTP AP modules that
# need to run with ASN URI v2 protocol.
XT_SERVER_ROOT_URL = https://gtp1.izatcloud.net:443/uds/v2
# ASN URI v3 to be used by GTP AP modules that
# can support ASN URI v3 protocol.
XT_SERVER_ROOT_URL_V3 = https://gtp1.izatcloud.net:443/uds/v3
# size, in bytes, of the cache on device
SIZE_BYTE_TOTAL_CACHE = 5000000
##############################################################################
# IOT devices configuration items #
# For IOT devices, configure below configuration items #
# according to the app note and remove the configuration items in section of #
# "non-IOT devices configuration items". #
##############################################################################
# ASN URI v3 to be used by GTP AP modules that
# can support ASN URI v3 protocol.
# XT_SERVER_ROOT_URL_V3 = https://gtpma1.izatcloud.net:443/uds/v3
# 1: default mode, where mobile downloads tiles and partitions
# 2: mode for memory and bandwidth limited devices, where mobile
# downloads AP list and cell list
# GTP_AP_MODE = 2
# 1: MP cell features relies on GTP AP for either download or upload
# 0: MP cell features does not rely on GTP AP
# GTP_AP_NEEDED_BY_MP_CELL = 1
##############################################################################
# Configuration items applicable to all devices #
##############################################################################
# Log verbosity control for most of the GTP WiFi system, including native and
# Java componenets
@ -20,63 +66,10 @@ OEM_ID_IN_REQUEST_TO_SERVER = "Qualcomm"
# default "UNKNOWN"
MODEL_ID_IN_REQUEST_TO_SERVER = "UNKNOWN"
##############################################################################
# GTP-WiFi positioning config #
##############################################################################
# URL for the server position request
XT_SERVER_ROOT_URL = https://gtpa1.izatcloud.net:443/uds/v2
# size, in bytes, of the cache on device
SIZE_BYTE_TOTAL_CACHE = 5000000
# value 0: (default) use the async LOWI wifi scanner
# value 10: FAKE AP wifi scanner
WIFI_SCANNER_CHOICE = 0
##############################################################################
# XT-WiFi crowd sourcing config #
##############################################################################
# Use server suggestion for crowd sourcing configuration
ENABLE_SERVER_SUGGESTION_FOR_CROWD_SOURCING = 1
# Maximum number of APs to be collected for upload
NUM_MAX_AP_PER_UPLOAD = 16383
# Number of minutes between upload: 24 hours
INTERVAL_MIN_UPLOAD = 1440
# Number of minutes between forced upload: 5 days
INTERVAL_MIN_FORCED_UPLOAD = 7200
# The minimum time between two collected AP data sets in seconds
INTERVAL_SEC_AP_SETS_COLLECT = 10
# Timeout for scan interval when phone is on: 600 seconds (10 minute)
INTERVAL_SEC_SCAN = 600
# Timeout for scan interval when phone has not continusouly on for INTERVAL_MIN_SCAN
INTERVAL_MIN_FORCED_SCAN = 480
# Maximum number of Cell DB records for upload
WWAN_MAX_CELLDB_RECORDS_PER_UPLOAD = 1000
##############################################################################
# GTP AP cell config #
##############################################################################
# This item specifies the RIL server name.
# This configure item can not be removed in Android target.
XTRAT_WWAN_LITE_LOC_RIL_SERVER_NAME = "OS-Agent"
# Maximum total number of SNA records cached in mobile storage.
# Max allowed value is 10000
# Min value is 100
XTRAT_WWAN_LITE_MAX_DL_SNA = 10000
# Maximum total number of BSA records cached in mobile storage.
# Max allowed value is 65000
# Min value is 100
XTRAT_WWAN_LITE_MAX_DL_BSA = 65000
##############################################################################
# Qualcomm Network Location Provider config #
##############################################################################
# Accuracy Threshold for NLP position. Position exceeds thsi threshold will be filtered out.
# Default is 25000 meters.
LARGE_ACCURACY_THRESHOLD_TO_FILTER_NLP_POSITION = 25000

View file

@ -1,20 +1,18 @@
# GPS
PRODUCT_PACKAGES += \
android.hardware.gnss@1.0-impl \
gps.msm8937 \
android.hardware.gnss@1.0-impl-qti \
libcurl \
libgnss \
libgnsspps
PRODUCT_BOOT_JARS += \
com.qti.location.sdk
PRODUCT_COPY_FILES += \
$(VENDOR_PATH)/gps/etc/flp.conf:system/etc/flp.conf \
$(VENDOR_PATH)/gps/etc/gps.conf:system/etc/gps.conf \
$(VENDOR_PATH)/gps/etc/izat.conf:system/etc/izat.conf \
$(VENDOR_PATH)/gps/etc/lowi.conf:system/etc/lowi.conf \
$(VENDOR_PATH)/gps/etc/sap.conf:system/etc/sap.conf \
$(VENDOR_PATH)/gps/etc/xtwifi.conf:system/etc/xtwifi.conf
$(VENDOR_PATH)/gps/etc/apdr.conf:$(TARGET_COPY_OUT_VENDOR)/etc/apdr.conf \
$(VENDOR_PATH)/gps/etc/flp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/flp.conf \
$(VENDOR_PATH)/gps/etc/gps.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gps.conf \
$(VENDOR_PATH)/gps/etc/izat.conf:$(TARGET_COPY_OUT_VENDOR)/etc/izat.conf \
$(VENDOR_PATH)/gps/etc/lowi.conf:$(TARGET_COPY_OUT_VENDOR)/etc/lowi.conf \
$(VENDOR_PATH)/gps/etc/sap.conf:$(TARGET_COPY_OUT_VENDOR)/etc/sap.conf \
$(VENDOR_PATH)/gps/etc/xtwifi.conf:$(TARGET_COPY_OUT_VENDOR)/etc/xtwifi.conf
# Permissions
PRODUCT_COPY_FILES += \

View file

@ -151,50 +151,48 @@ vendor/lib64/libtzdrmgenprov.so
vendor/lib/hw/gatekeeper.msm8937.so
vendor/lib64/hw/gatekeeper.msm8937.so
# GPS - from garlic (YUREKA BLACK)
-framework/com.qti.location.sdk.jar
-framework/com.qualcomm.location.vzw_library.jar
-framework/izat.xt.srv.jar
-lib64/libloc_api_v02.so
-lib64/libloc_ds_api.so
-priv-app/com.qualcomm.location/com.qualcomm.location.apk
bin/loc_launcher:vendor/bin/loc_launcher
bin/lowi-server:vendor/bin/lowi-server
bin/xtwifi-client:vendor/bin/xtwifi-client
bin/xtwifi-inet-agent:vendor/bin/xtwifi-inet-agent
etc/permissions/com.qti.location.sdk.xml
etc/permissions/com.qualcomm.location.vzw_library.xml
etc/permissions/com.qualcomm.location.xml
etc/permissions/izat.xt.srv.xml
etc/xtra_root_cert.pem
vendor/bin/slim_daemon
vendor/lib64/hw/flp.default.so
vendor/lib64/libalarmservice_jni.so
vendor/lib64/libasn1cper.so
vendor/lib64/libasn1crt.so
vendor/lib64/libasn1crtx.so
vendor/lib64/libdataitems.so
vendor/lib64/libDRPlugin.so
vendor/lib64/libdrplugin_client.so
vendor/lib64/libevent_observer.so
vendor/lib64/libflp.so
vendor/lib64/libgdtap.so
vendor/lib64/libgeofence.so
vendor/lib64/libizat_client_api.so
vendor/lib64/libizat_core.so
vendor/lib64/liblbs_core.so
vendor/lib64/libloc_ext.so
vendor/lib64/libloc_externalDr.so
vendor/lib64/liblocationservice.so
vendor/lib64/liblocationservice_glue.so
vendor/lib64/liblowi_client.so
vendor/lib64/liblowi_wifihal.so
vendor/lib64/liblowi_wifihal_nl.so
vendor/lib64/libslimclient.so
vendor/lib64/libulp2.so
vendor/lib64/libxt_native.so
vendor/lib64/libxtadapter.so
vendor/lib64/libxtwifi_ulp_adaptor.so
# GPS - from bardock-pro - OPM1.171019.011
etc/permissions/com.qti.location.sdk.xml|cb68a566bd77dcc75bb7547199d528289fac01cb
etc/permissions/com.qualcomm.location.xml|e837966b6a1a63430ac7ff648e84b0312cd3a46b
etc/permissions/izat.xt.srv.xml|a0f460056f27b5495a4d6e959eecf0e429c42a57
framework/com.qti.location.sdk.jar|f2e9f1d49201e1bad83008445fdafe9541e9b2bd
framework/izat.xt.srv.jar|e10f1baf6ae0f70c4a529e5711559cebbc3644c9
lib64/liblocationservice_jni.so|84fddd9ace2be661d26cad1864281c386b709cb2
lib64/libxt_native.so|900aa51d3d2f731b906a321e25c259fbab656f1c
lib64/vendor.qti.gnss@1.0.so|716a812a9f4cdb45c57eb0a6fabb17624a91d553
-priv-app/com.qualcomm.location/com.qualcomm.location.apk|397314f080f553489440c63da44d01f482e6b761
vendor/bin/hw/vendor.qti.gnss@1.0-service|bdf23fe2af07c2afb74721023431446104fd828d
vendor/bin/loc_launcher|0675f4524d2c9e94f7e978b5e00734c0835ddf15
vendor/bin/lowi-server|4aa6f305f31ff36fdddc7e3beeb29cf0bf1a9d54
vendor/bin/slim_daemon|ac7b90dcc27ef1d1fdd6a1c98bc495f90d19ecf4
vendor/bin/xtra-daemon|8dac3ae4b8d1be18b40763861f9440b6278ff902
vendor/etc/cacert_location.pem|0789bf799c7e45d352a83e2f79ddb0cea86db85b
vendor/etc/init/vendor.qti.gnss@1.0-service.rc|98655e2adc2158a052b0ecf06b065535f0a2aac7
vendor/etc/xtra_root_cert.pem|f55a31ec4d9cf8ce2724acadecf00c779f8767db
vendor/lib64/hw/vendor.qti.gnss@1.0-impl.so|3a66e268286ebfad3f1e35f54b041d6b3d2ed191
vendor/lib64/libalarmservice_jni.so|2791b868e4f145e05d3405b99e40692e87d0a3c6
vendor/lib64/libdataitems.so|e175d6254907cde80b1352da2874d88c3607d77f
vendor/lib64/libdrplugin_client.so|bcd1266f5775888824a925c65020cac65b4124df
vendor/lib64/libDRPlugin.so|21256ab36eb1ae0a9b32eee03a6af162d1920fc8
vendor/lib64/libevent_observer.so|c163884372303f68e1fc073cf42d30959ef771c6
vendor/lib64/libflp.so|22f9cfcbd1c89db91b3e9cece2f670c282eacc1b
vendor/lib64/libgdtap.so|efc9752ac1f829bd28d4575370c3bf649fb9c691
vendor/lib64/libgeofence.so|a92df9ea383d7bad2d0283c9d160d6b26f30fdbb
vendor/lib64/libizat_client_api.so|896931c51c7fa8a9f626c971361679823e635d77
vendor/lib64/libizat_core.so|8857e6b3b0fa04900285fad5101b4157f62f33a7
vendor/lib64/liblbs_core.so|3f55ad81c6eaa76c9a8cdc436808692e3d12fe44
-vendor/lib64/libloc_api_v02.so|548d3280b4b340803cc7cdbd794dfcffd65012bf
vendor/lib64/libloc_ds_api.so|88bd00eef7b3e052e2725ce8883a8da0d95028f0
vendor/lib64/libloc_externalDr.so|9165f1621d9d34034c4921c96bf45849429f32fd
vendor/lib64/liblocationservice_glue.so|9f56f0e9089f0eadc29036c2cffd5a06852f4cb0
vendor/lib64/liblocationservice.so|13eae193a44f991daf2c54eb2311901bd32a6d8b
vendor/lib64/liblowi_client.so|b6a6e3315ff02115fba6a3c7c023ef94530cf272
vendor/lib64/liblowi_wifihal.so|831095ee8091008db81af836cafc8a90b210d4bc
vendor/lib64/libquipc_os_api.so|12ffd3e3a2d566d68c1ee45b0879597822df7971
vendor/lib64/libulp2.so|1a92023fbe40d5042239f3efbdcd82f3299e8b17
vendor/lib64/libxtadapter.so|7705b2c895dfc91f459f9e69860bc312c16b4216
vendor/lib64/libxtwifi_ulp_adaptor.so|d2e768c4d5f44a101b12ef668f8b7393a42541ce
vendor/lib64/vendor.qti.gnss@1.0_vendor.so|249c76153f8de014bf2dd2ab623ee3d87741fbc8
# Graphics - from vince 8.1.0 OPM1.171019.019
vendor/lib/egl/eglSubDriverAndroid.so

View file

@ -403,7 +403,7 @@ service wpa_supplicant /vendor/bin/hw/wpa_supplicant \
service loc_launcher /vendor/bin/loc_launcher
#loc_launcher will start as root and set its uid to gps
class late_start
group gps inet net_raw qcom_diag net_admin wifi
group gps inet diag wifi
writepid /dev/cpuset/system-background/tasks
service qcom-sh /system/bin/sh /init.qcom.sh