# BoardConfig.mk # # Product-specific compile-time definitions. # include device/softwinner/octopus-common/BoardConfigCommon.mk # image related TARGET_NO_BOOTLOADER := true TARGET_NO_RECOVERY := false TARGET_NO_KERNEL := false INSTALLED_KERNEL_TARGET := kernel BOARD_KERNEL_CMDLINE := TARGET_USERIMAGES_USE_EXT4 := true BOARD_FLASH_BLOCK_SIZE := 4096 BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1610612736 # recovery stuff #TARGET_RECOVERY_PIXEL_FORMAT := "BGRA_8888" TARGET_RECOVERY_UI_LIB := librecovery_ui_octopus_perf SW_BOARD_TOUCH_RECOVERY :=true # wifi and bt configuration # 1. Wifi Configuration BOARD_WIFI_VENDOR := broadcom ifeq ($(BOARD_WIFI_VENDOR), broadcom) BOARD_WPA_SUPPLICANT_DRIVER := NL80211 WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_bcmdhd BOARD_HOSTAPD_DRIVER := NL80211 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_bcmdhd BOARD_WLAN_DEVICE := bcmdhd WIFI_DRIVER_FW_PATH_PARAM := "/sys/module/bcmdhd/parameters/firmware_path" BOARD_USR_WIFI := ap6210 include hardware/broadcom/wlan/bcmdhd/firmware/$(BOARD_USR_WIFI)/device-bcm.mk endif # 2. Bluetooth Configuration # make sure BOARD_HAVE_BLUETOOTH is true for every bt vendor BOARD_HAVE_BLUETOOTH := true BOARD_HAVE_BLUETOOTH_BCM := true BOARD_HAVE_BLUETOOTH_NAME := ap6210 BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/softwinner/octopus-perf/bluetooth/ #gsensor & Gyr sensor SW_BOARD_USES_SENSORS_TYPE = aw_sensors # boostup code will on command to set CPU roomage and DDR freq # default enable TARGET_USE_BOOSTUP_OPZ := true